S36200
2014-11-03 11:44:44 Origin： Remark：0 Click：
Technical specification S36200 Precipitation Hardening Steel Round bar, Flat bar, S36200 Shaft Hot forging / rolling, Heat treatment , Cold working
MATERIAL DATA SHEET - S36200
MATERIAL CATEGORY: Precipitation hardening type 14Cr-6Ni-Ti
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD / EAF followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment + aged.
The alloy is usually produced by AOD / VOD / EAF followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment + aged.
MATERIAL SPECIFICATIONS - ASTM A959 (2004), A276, A312, A632, A176, A580, A564
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (％): ≤ 0.05
Silicon, Si (％): ≤ 0.30
Manganese, Mn (％): ≤ 0.50
Phosphorus, P (％) ≤: 0.030
Sulfur, S (％) ≤: 0.030
Chromium, Cr (％): 14.0～15.0
Nickel, Ni (％): 6.00～7.00
Molybdenum, Mo (％): ≤ 0.30
Other (％): Aluminum ≤ 0.10,Titanium 0.55 ~ 0.90
Silicon, Si (％): ≤ 0.30
Manganese, Mn (％): ≤ 0.50
Phosphorus, P (％) ≤: 0.030
Sulfur, S (％) ≤: 0.030
Chromium, Cr (％): 14.0～15.0
Nickel, Ni (％): 6.00～7.00
Molybdenum, Mo (％): ≤ 0.30
Other (％): Aluminum ≤ 0.10,Titanium 0.55 ~ 0.90
MECHANICAL PROPERTIES FINAL HEAT TREATMENT
Form: plate,sheet,strip
Condition: H843, air cooling
Tensile strength, Rm / MPa: 1350
Yield strength, Rpσ0.2 / MPa: 860
Elongation, A5 (％): 4.0
Reduction of area, Z (％): 28
Elongation, A5 (％): 4.0
Reduction of area, Z (％): 28
Hardness | HRB: -
HEAT TREATMENT PRACTICE
Heat treatment is only suitable for specific grades of stainless steel. When heat treating a stainless the hardening temperatures, including rate of heating, cooling and soaking times will vary due to several factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult with the heat treatment provider for whole guidance on heat treatment of stainless steel grades. We are delighted to help to work with you the special heat treatment based on your special requirements.
Heat treatment is only suitable for specific grades of stainless steel. When heat treating a stainless the hardening temperatures, including rate of heating, cooling and soaking times will vary due to several factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult with the heat treatment provider for whole guidance on heat treatment of stainless steel grades. We are delighted to help to work with you the special heat treatment based on your special requirements.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL (sales@ccsteels.com) our resident team of qualified Product engineers.
If you meet further on any technical enquiry. pleased to EMAIL (sales@ccsteels.com) our resident team of qualified Product engineers.
PRODUCT PROFILE & DIMENSIONS
Round bar / Wire rod (Diameter): 5.50mm ~ 800mm
Square bar / Flat bar: 6mm to 600mm
Plate / Sheet steel / Steel strip: 1mm to 1200mm
Width: 8mm to 1500mm
Length: random length or based on the customer's special requirement.
Forged steel shape: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different Shapes based on OEM.
Round bar / Wire rod (Diameter): 5.50mm ~ 800mm
Square bar / Flat bar: 6mm to 600mm
Plate / Sheet steel / Steel strip: 1mm to 1200mm
Width: 8mm to 1500mm
Length: random length or based on the customer's special requirement.
Forged steel shape: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different Shapes based on OEM.
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1