Custom 450
2014-11-04 10:03:08 Origin： Remark：0 Click：
Precipitation hardening steel Custom 450 Round bar, flat bar, forgings GD-450 (ESR refined), Hot forging / rolling, XM-25 Heat treatment, Cold machined.
TECHNICAL DATA SHEET - Custom 450
MATERIAL CATEGORY - Precipitation hardening type 15Cr-6Ni-Mo-2Cu
Stocklist on hand - Round bar diameter 20 ~ 260mm
MATERIAL SPECIFICATIONS - ASTM A959 (2004), A276, A693, A632
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (％): ≤ 0.05
Silicon, Si (％): ≤ 1.00
Manganese, Mn (％): ≤ 1.00
Phosphorus, P (％)≤: 0.030
Sulfur, S (％)≤: 0.020
Chromium, Cr (％): 14.0 ~ 16.0
Nickel, Ni (％): 5.00 ~ 7.00
Molybdenum, Mo (％): 0.50 ~ 1.00
Copper, Cu (％): 1.25 ~ 1.75
Silicon, Si (％): ≤ 1.00
Manganese, Mn (％): ≤ 1.00
Phosphorus, P (％)≤: 0.030
Sulfur, S (％)≤: 0.020
Chromium, Cr (％): 14.0 ~ 16.0
Nickel, Ni (％): 5.00 ~ 7.00
Molybdenum, Mo (％): 0.50 ~ 1.00
Copper, Cu (％): 1.25 ~ 1.75
Niobium, Nb (%): ≥ 8 × C
MECHANICAL PROPERTIES UNDER HEAT TREATMENT
Form: round bar, flat bar
Condition: annealed
Tensile strength, Rm / MPa: 895
Yield strength, Rp0.2 / MPa: 655
Elongaton, 5A (％): 10.0
Reduction of area, Z (％): 40.0
Elongaton, 5A (％): 10.0
Reduction of area, Z (％): 40.0
Hardness | HRC: 32min.
Form: forge piece
Condition: annealed
Tensile strength, σb/MPa: 860
Yield strength, σ0.2/MPa: 655
Elongation, δ (％): 10.0
Reduction of area, ф(％): 40
Elongation, δ (％): 10.0
Reduction of area, ф(％): 40
Hardness | HRC: 33min.
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD / EAF followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment + Aged.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment + Aged.
TYPICAL APPLICATIONS
Chemical equipment & parts.
Mechanical parts used in the condition of corrosion resistance.
Bolts and nuts, Pressure vessel.
Chemical equipment & parts.
Mechanical parts used in the condition of corrosion resistance.
Bolts and nuts, Pressure vessel.
PROFILE & DIMENSIONS
Round bar & Disc (diameter): 5.5mm to 550mm
Square bar / Flat bar: 10mm to 1200mm
Plate / Sheet steel / Steel strip: 1mm to 300mm
Width: 8mm to 1000mm
Forged steel shape: stepped shafts, other different shapes based on OEM.
Round bar & Disc (diameter): 5.5mm to 550mm
Square bar / Flat bar: 10mm to 1200mm
Plate / Sheet steel / Steel strip: 1mm to 300mm
Width: 8mm to 1000mm
Forged steel shape: stepped shafts, other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com.
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com.
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1