S46500
2014-11-05 09:18:49 Origin： Remark：0 Click：
ASTM A959 Specifications Precipitation hardening steel S46500 Round bar, Flat bar, Plate S46500 Stock Available, Hot rolling, Heat treatment
MATERIAL DATA SHEET - UNS S46500
MATERIAL CATEGORY: Precipitation hardening type 12Cr-11Ni-1Mo-2Ti
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD / EAF followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment + aged.
The alloy is usually produced by AOD / VOD / EAF followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment + aged.
AVAILABILITY
Round bar / Flat bar / Steel strip / Square bar / Forged plate
Bright - peeled + polishing, centerless grinding
Forged - ring, tube, pipe casing, discs, shaft
Round bar / Flat bar / Steel strip / Square bar / Forged plate
Bright - peeled + polishing, centerless grinding
Forged - ring, tube, pipe casing, discs, shaft
MATERIAL SPECIFICATIONS - ASTM A959 (2004), A276, A312, A632, A176, A580, A564
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (％): ≤ 0.020
Silicon, Si (％): ≤ 0.25
Manganese, Mn (％): ≤ 0.25
Phosphorus, P (％) ≤: 0.015
Sulfur, S (％) ≤: 0.010
Chromium, Cr (％): 11.0 ~ 12.5
Nickel, Ni (％): 10.7 ~ 11.3
Molybdenum, Mo (％): 0.75 ~ 1.25
Nitorgen, N (&): -
Titanium, Ti (％): 1.50 ~ 1.80
Silicon, Si (％): ≤ 0.25
Manganese, Mn (％): ≤ 0.25
Phosphorus, P (％) ≤: 0.015
Sulfur, S (％) ≤: 0.010
Chromium, Cr (％): 11.0 ~ 12.5
Nickel, Ni (％): 10.7 ~ 11.3
Molybdenum, Mo (％): 0.75 ~ 1.25
Nitorgen, N (&): -
Titanium, Ti (％): 1.50 ~ 1.80
MECHANICAL PROPERTIES FINAL HEAT TREATMENT
Form: Flat bar, Round bar, steel plate
Condition: anneal solution
Tensile strength, Rm / MPa: -
Yield strength, Rp0.2 / MPa: -
Elongation, A5 (％): -
Reduction of area, ф (％): -
Elongation, A5 (％): -
Reduction of area, ф (％): -
Hardness | HRW: 331 max.
Condition: + solution 980 Deg. 4 hours, air or oil cooled + Aged 560 Deg.
Tensile strength, σb/MPa: 1450
Yield strength, σ0.2/MPa: 1345
Elongation, δ (％): 11.0
Reduction of area, ф (％): 45.0
Elongation, δ (％): 11.0
Reduction of area, ф (％): 45.0
Hardness | HB: 415 min.
HEAT TREATMENT PRACTICE
Heat treatment is only suitable for specific grades of stainless steel. When heat treating a stainless the hardening temperatures, including rate of heating, cooling and soaking times will vary due to several factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult with the heat treatment provider for whole guidance on heat treatment of stainless steel grades. We are delighted to help to work with you the special heat treatment based on your special requirements.
PRODUCT PROFILE & DIMENSIONS
Heat treatment is only suitable for specific grades of stainless steel. When heat treating a stainless the hardening temperatures, including rate of heating, cooling and soaking times will vary due to several factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult with the heat treatment provider for whole guidance on heat treatment of stainless steel grades. We are delighted to help to work with you the special heat treatment based on your special requirements.
PRODUCT PROFILE & DIMENSIONS
Round bar / Disc (diameter): 5.5 ~ 800mm
Square bar / Flat bar: 6 ~ 610mm
Plate / Sheet steel / Steel strip: 0.1 ~ 300mm
Width: 8mm to 1200mm
Length: random length or based on the customer's special requirement.
Forged steel shape: stepped shafts, other different shapes based on OEM.
Square bar / Flat bar: 6 ~ 610mm
Plate / Sheet steel / Steel strip: 0.1 ~ 300mm
Width: 8mm to 1200mm
Length: random length or based on the customer's special requirement.
Forged steel shape: stepped shafts, other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to Email (sales@ccsteels.com) our resident team of qualified production engineers.
If you meet further on any technical enquiry, pleased to Email (sales@ccsteels.com) our resident team of qualified production engineers.
Hot search：S46500
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1