1.4000
2014-11-11 11:44:28 Origin： Remark：0 Click：
Specifications 1.4000 Datasheet Stocklist 1.4000 Chemical Inventory 1.4000 Properties Steelmaking, Hot forging, hot rolling, heat treatment, cold working.We also possess advanced precision machining equipments for further processing.
MATERIAL TECHNICAL DATASHEET - Grade W-Nr 1.4000
MATERIAL CATEGORY - Common martensitic stainless steel
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD / EAF followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment: + QT
The alloy is usually produced by AOD / VOD / EAF followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment: + QT
MATERIAL SPECIFICATIONS - DIN 17445,17440, DIN EN 10088-1, 10297,10272,10312
CHEMICAL COMPOSITION (Mass weight %)
C (％): ≤ 0.08
Si (％): ≤ 1.00
Mn (％): ≤ 1.00
P (％)≤: 0.040
S (％)≤: 0.015
Cr (％): 12.0 ~ 14.0
Ni (％): -
Mo (％): -
MECHANICAL PROPERTIES UNDER ROOM TEMPERATURE
Si (％): ≤ 1.00
Mn (％): ≤ 1.00
P (％)≤: 0.040
S (％)≤: 0.015
Cr (％): 12.0 ~ 14.0
Ni (％): -
Mo (％): -
MECHANICAL PROPERTIES UNDER ROOM TEMPERATURE
Condition: heat treatment
Thickness/mm: -
Thickness/mm: -
Tensile strength, σb/MPa: 550 ~ 700
Yield strength, σ0.2≥/MPa: 400
Elongation, δ5≥(％): 18
Yield strength, σ0.2≥/MPa: 400
Elongation, δ5≥(％): 18
Reduction of area, ψ≥ (％): -
Impact strength, Akv≥/J: -
Impact strength, Akv≥/J: -
HEAT TREATMENT PRACTICE
Heat treatment is only suitable for specific grades of stainless steel. When heat treating a stainless the hardening temperatures, including rate of heating, cooling and soaking times will vary due to several factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult with the heat treatment provider for whole guidance on heat treatment of stainless steel grades. We are delighted to help to work with you the special heat treatment based on your special requirements.
Heat treatment is only suitable for specific grades of stainless steel. When heat treating a stainless the hardening temperatures, including rate of heating, cooling and soaking times will vary due to several factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult with the heat treatment provider for whole guidance on heat treatment of stainless steel grades. We are delighted to help to work with you the special heat treatment based on your special requirements.
AVAILABILITY
Black bar /Flat bar / steel strip / square bar
Bright - peeled + polishing, centerless grinding
Forged - ring, tube, pipe casing, discs, shaft
Black bar /Flat bar / steel strip / square bar
Bright - peeled + polishing, centerless grinding
Forged - ring, tube, pipe casing, discs, shaft
PRODUCT PROFILE & DIMENSIONS
Round bar / Wire rod (Diameter): 5.5mm to 500mm
Square bar / Flat bar: 3mm to 400mm
Round bar / Wire rod (Diameter): 5.5mm to 500mm
Square bar / Flat bar: 3mm to 400mm
Length: random length or based on the customer's special requirement.
Heavy/middle plate: T3 - 200mm X W10 - 2000mm X L1000-12000mm
Heavy/middle plate: T3 - 200mm X W10 - 2000mm X L1000-12000mm
Sheet steel: T0.5 - 3mm X W10 - 1000mm X L1000 - 2000mm
Steel strip: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TYPICAL APPLICATIONS
Medical equipment, Chemical equipments.
Mechanical parts used in the condition of corrosion resistance.
Bolt and nut, Pressure vessel.
Bolt and nut, Pressure vessel.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com
Hot search：1.4000
Previous page：32Cr2
Last page：X7Cr14 / 1.4001
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1