X6CrMoS17
2014-11-14 14:52:03   Origin：   Remark：0 Click：

OFFICIAL TEST CERTIFICATE: issued by TUV - SGS -  BV
TECHNICAL DATASHEET - Grade X6CrMoS17
SPECIAL MELTING PROCESS - BEF + AOD
MATERIAL CATEGORY - Stainless steel round bar, wire rod, and semi-finished products
STEEL TYPE - Ferrite stainless steel  series
HS Code For Customs - 72221100 / 72221900 / 72222000
MATERIAL SPECIFICATIONS - DIN 17445,17440, DIN EN 10088-1, 10297,10272,10312 
CHEMICAL COMPOSITION (Mass Weight - %) 
C (％):     ≤ 0.08
Si (％):    ≤ 1.50
Mn (％):   ≤ 1.50
P (％)≤:   0.040
S (％)≤:   0.15 ~ 0.35
Cr (％):    16.0 ~ 18.0
Ni (％):    -
Mo (％):   0.20 ~ 0.60
MECHANICAL PROPERTY UNDER ROOM TEMP.
Forms: Round bar, flat bar, forgings and plate
Tensile strength, σb/≥ MPa: 430 ~ 630
Yield strength, σ0.2/MPa: 250
Elongation, δ ≥(％): 20.0
Reduction of area, ф ≥ (％): -
Hardness via heat treatment /HBW:  217 max.
PRODUCT DESCRIPTION
The alloy is usually produced by EAF AOD.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
AVAILABLE PROFILE & DIMENSIONS
Round bar / Wire rod (Diameter): 5.5mm to 550mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy / middle plate via hot rolled: T60 - 400mm X W70 - 1500mm X L1000-12000mm
Sheet steel via cold rolled: T0.5 - 6mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com