1.4306 / X2CrNi19-11
2025-01-21 14:09:00 Origin： Remark：0 Click：
Technical specifications of DIN 1.4306 Austenitic stainless steel - Chemical composition,mechanical properties from steelmaking,forging,rolling,heat treatment,cold working.
AUSTENITIC STEEL - X2CrNi19-11 & 1.4306
MATERIAL CATEGORY: Austenitic corrosion resisting steels
PRODUCT DESCRIPTION
The alloy 1.4306 is usually produced by AOD / EAF followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black in the annealed condition.
Final heat treatment - solution treatment.
The alloy 1.4306 is usually produced by AOD / EAF followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black in the annealed condition.
Final heat treatment - solution treatment.
MATERIAL SPECIFICATIONS - DIN 17445,17440(1999/1996), DIN EN 10088-1, 10297,10272,10312
CHEMICAL COMPOSITIONS (mass weight - %)
Carbon, C (％): ≤ 0.030
Silicon, Si (％) ≤: 1.00
Manganese, Mn (％) ≤: 2.00
Phosphorus, P (％) ≤: 0.045
Sulfur, S (％) ≤: 0.030
Chromium, Cr (％): 18.0～20.0
Nickel, Ni (％): 10.0～12.0
Molybdenum, Mo (％): -
Nitrogen, N (％): ≤ 0.11
Silicon, Si (％) ≤: 1.00
Manganese, Mn (％) ≤: 2.00
Phosphorus, P (％) ≤: 0.045
Sulfur, S (％) ≤: 0.030
Chromium, Cr (％): 18.0～20.0
Nickel, Ni (％): 10.0～12.0
Molybdenum, Mo (％): -
Nitrogen, N (％): ≤ 0.11
MECHANICAL PROPERTIES UNDER ROOM TEMPERATURE
Condition: solution treatment
Thickness/mm:160/250
Thickness/mm:160/250
Tensile strength, σb / MPa: 460~680
Yield strength, σ0.2 ≥ MPa:180
Elongation, δ5 ≥ (％): 45/35
Elongation, δ5 ≥ (％): 45/35
Reduction of area, ψ ≥ (％): 60
Impact strength, Akv ≥ J: 100 / 60
40 Hardness HBS30: 215max
Impact strength, Akv ≥ J: 100 / 60
40 Hardness HBS30: 215max
MECHANICAL PROPERTIES ABOVE ROOM TEMPERATURE
Hot forming temp/℃: 1200 ~ 900
Heat treatment temperature and cooling methods|annealing: -
Heat treatment temperature and cooling methods|quenching: 1000~1100 air/water cooled
Heat treatment temperature and cooling methods|tempering: -
Condition: solution
High temperature yield strength σ0.2/MPa≥/MPa，at below temp/℃|100: 145
High temperature yield strength σ0.2/MPa≥/MPa，at below temp/℃|200: 118
High temperature yield strength σ0.2/MPa≥/MPa，at below temp/℃|200: 118
High temperature yield strength σ0.2/MPa≥/MPa，at below temp/℃|300: 100
High temperature yield strength σ0.2/MPa≥/MPa，at below temp/℃|400: 89
High temperature yield strength σ0.2/MPa≥/MPa，at below temp/℃|400: 89
High temperature yield strength σ0.2/MPa≥/MPa，at below temp/℃|500: 81
HEAT TREATMENT PRACTICE
Heat treatment is only suitable for specific grades of stainless steel. When heat treating a stainless the hardening temperatures, including rate of heating, cooling and soaking times will vary due to several factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult with the heat treatment provider for whole guidance on heat treatment of stainless steel grades. We are delighted to help to work with you the special heat treatment based on your special requirements.
Heat treatment is only suitable for specific grades of stainless steel. When heat treating a stainless the hardening temperatures, including rate of heating, cooling and soaking times will vary due to several factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult with the heat treatment provider for whole guidance on heat treatment of stainless steel grades. We are delighted to help to work with you the special heat treatment based on your special requirements.
TYPICAL APPLICATIONS
Medical equipment
Chemical equipments
Mechanical parts used in the condition of corrosion resistance
Bolt and nut
Pressure vessel
Mechanical parts used in the condition of corrosion resistance
Bolt and nut
Pressure vessel
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com.
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com.
PRODUCT PROFILE
Round bar / Wire rod (Diameter): 0.50mm to 800mm
Square bar / Flat bar: 3mm to 800mm
Round bar / Wire rod (Diameter): 0.50mm to 800mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T6 - 200mm X W1000- 2500mm X L1000-12000mm
Sheet steel via cold rolled: T0.5 - 6mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts, other different shapes based on OEM.
Hot search：1.4306 /DIN X2CrNi19-11
Previous page：X2CrNi19-11
Last page：20CrMoVTiB4-10
Total list
Monthly rank
- 54ASTM A565 type 616HT
- 27X35CrMo17
- 26Z15CN17-03
- 19P550
- 19X12CrMoWVNbN10-1-1
- 16S42400
- 15ASTM A638 Gr.660
- 15SAE 51420
- 14S165M / S165
- 13X120Mn13