1.4313
2014-11-18 10:40:10 Origin： Remark：0 Click：
Description 1.4313 Martensitic Corrosion resistant steel, Ex-stock 1.4313 wire rod, Inventory 1.4313 Shaft Properties from steelmaking, hot forging, hot rolling, heat treatment
MATERIAL DATA SHEET - Grade DIN 1.4313
MATERIAL CATEGORY - Martensitic corrosion resisting steels
MATERIAL SPECIFICATIONS - DIN 17445, 17440, DIN EN 10088-1, 10297,10272,10312
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (％): ≤ 0.05
Silicon, Si (％): ≤ 0.70
Manganese, Mn (％): ≤ 1.50
Phosphorus, P (％) ≤: 0.040
Sulfur, S (％) ≤: 0.015
Chromium, Cr (％): 12.0～14.0
Nickel, Ni (％): 3.50～4.50
Molybdenum, Mo (％): 0.30～0.70
Nitrogen, N (％): ≥ 0.020
Silicon, Si (％): ≤ 0.70
Manganese, Mn (％): ≤ 1.50
Phosphorus, P (％) ≤: 0.040
Sulfur, S (％) ≤: 0.015
Chromium, Cr (％): 12.0～14.0
Nickel, Ni (％): 3.50～4.50
Molybdenum, Mo (％): 0.30～0.70
Nitrogen, N (％): ≥ 0.020
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Condition: heat treatment + QT650
Tensile strength, σb/MPa: 650～830
Yield strengt, σ0.2≥/MPa: 520
Elongation, δ5≥(％): 15/12
Reduction of area, ψ≥(％): -
Impact strength, Akv≥/J: 70/50
Tensile strength, σb/MPa: 650～830
Yield strengt, σ0.2≥/MPa: 520
Elongation, δ5≥(％): 15/12
Reduction of area, ψ≥(％): -
Impact strength, Akv≥/J: 70/50
Hardness HBS30: -
Condition of heat treatment: QT900
σb/MPa: 900～1100
σ0.2≥/MPa: 800
δ5≥(％): 10.0
ψ ≥(％): -
Akv≥/J: 40
σ0.2≥/MPa: 800
δ5≥(％): 10.0
ψ ≥(％): -
Akv≥/J: 40
Hardness HBS30: -
TYPICAL APPLICATIONS
Medical equipment, Chemical equipments.
Mechanical parts used in the condition of corrosion resistance
Bolt and nut, Pressure vessel.
Bolt and nut, Pressure vessel.
PRODUCT PROFILE & DIMENSION
Round bar / Disc (diameter): 5.5mm to 550mm
Square bar / Flat bar: 3mm to 800mm
Round bar / Disc (diameter): 5.5mm to 550mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 - 400mm X W50 - 1000mm X L1000 - 5000mm
Heavy/middle plate via hot rolled: T60 - 400mm X W50 - 1000mm X L1000 - 5000mm
Sheet steel via cold rolled: T0.5 - 6mm X W100 - 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shaft, and other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry or help, pleased to EMAIL our resident team of qualified production engineers. Email: sales@ccsteels.com.
If you meet further on any technical enquiry or help, pleased to EMAIL our resident team of qualified production engineers. Email: sales@ccsteels.com.
Hot search：1.4313
Previous page：X4CrNi13-4
Last page：X2CrNiN18-7
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1