1.8522
2015-01-30 09:47:35 Origin： Remark：0 Click：
Carburized structural steel 1.8522 Round bar, Flat bar 1.8522 Shaft, Inventory 1.8522 Stocklist from steelmaking, ESR, Hot forging/hot rolling, heat treatment,
Official Test Certificate: issued by TUV - SGS - BV
RAM MATERIAL SPECIFICATION - Grade W-Nr 1.8522
MATERIAL CATEGORY: Carburized structural steel
PRODUCT DESCRIPTION
Simplified design for bolting configuration compared with martensitic steels or high nickel alloys.
Simplified design for bolting configuration compared with martensitic steels or high nickel alloys.
Alloy structural steel is provided with higher yield strength, tensile strength, endurance strength, yield ratio (about 0.85 generally ) enough plasticity and toughness.
The concentration of alloy element of this kind of steel is quite high, mainly are corrosion resistant steel, heat resistant steel, wear resistant steel, and other special steels of physical and chemical properties. Alloy structural steel has preferable mechanical property than that of carbon structural steel, high performance of heat treatment especially.
The alloy is usually produced by EAF /VD /LF followed by electroslag refining (ESR) if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different level according to the buyers' requirements.
Bars are usually supplied bright in the annealed condition, or bright annealing specially.
Final heat treatment - heat treatment / QT
The concentration of alloy element of this kind of steel is quite high, mainly are corrosion resistant steel, heat resistant steel, wear resistant steel, and other special steels of physical and chemical properties. Alloy structural steel has preferable mechanical property than that of carbon structural steel, high performance of heat treatment especially.
The alloy is usually produced by EAF /VD /LF followed by electroslag refining (ESR) if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different level according to the buyers' requirements.
Bars are usually supplied bright in the annealed condition, or bright annealing specially.
Final heat treatment - heat treatment / QT
MATERIAL SPECIFICATIONS - DIN EN 10085 (2001), DIN 17211 (1987)
CHEMICAL COMPOSITION (Mass weight - %)
Carbon, C (％): 0.29 ~ 0.36
Silicon, Si (％): ≤ 0.40
Manganese, Mn (％): 0.40 ~ 0.70
Phosphorus, P (％)≤: 0.025
Sulfur, S (％)≤: 0.025
Chromium, Cr (％): 2.80 ~ 3.30
Molybdenum, Mo (％): 0.70 ~ 1.00
Vanadium, V (％): 0.15 ~ 0.25
Silicon, Si (％): ≤ 0.40
Manganese, Mn (％): 0.40 ~ 0.70
Phosphorus, P (％)≤: 0.025
Sulfur, S (％)≤: 0.025
Chromium, Cr (％): 2.80 ~ 3.30
Molybdenum, Mo (％): 0.70 ~ 1.00
Vanadium, V (％): 0.15 ~ 0.25
MECHANICAL PROPERTIES - HOT WORKING, HEAT TREATMENT AND HARDNESS
Hot working temperature /℃: 1050～850
Heat treatment temperature /℃|annealing: 850
Heat treatment temperature /℃|quenching: 900~925 Oil
Heat treatment temperature /℃|tempering: 600～660
Hardness after annealing HBS≤: 248
Heat treatment temperature /℃|annealing: 850
Heat treatment temperature /℃|quenching: 900~925 Oil
Heat treatment temperature /℃|tempering: 600～660
Hardness after annealing HBS≤: 248
Tensile strength, ≥|σb/MPa: 1150 ~ 1350
Yield strength, ≥|σs≥/MPa: 950
Elongation, ≥|δ5 (％)≥: 11.0
Impact strength, ≥|AKU/J : 70
PRODUCT PROFILE & DIMENSIONS
Impact strength, ≥|AKU/J : 70
PRODUCT PROFILE & DIMENSIONS
Round bar / Disc (diameter): 5.5mm to 650mm
Square bar / flat bar: 10mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Square bar / flat bar: 10mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 ~ 400mm X W50 ~ 1000mm X L1000 ~ 4000mm
Sheet steel via cold rolled: T1.5 - 6mm X W10 - 1000mm X L1000 - 2000mm
Forging piece: stepped shafts, other different shapes based on OEM.
Sheet steel via cold rolled: T1.5 - 6mm X W10 - 1000mm X L1000 - 2000mm
Forging piece: stepped shafts, other different shapes based on OEM.
TYPICAL APPLICATIONS
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Power generation – turbine fasteners – boiler support rods.
Process plant – fasteners. Mechanical gears, gear shaft, main axis, valve rod.
Mechanical parts - connecting rod, bolt and nut. Multidiameter shaft, Pressure vessel.
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Power generation – turbine fasteners – boiler support rods.
Process plant – fasteners. Mechanical gears, gear shaft, main axis, valve rod.
Mechanical parts - connecting rod, bolt and nut. Multidiameter shaft, Pressure vessel.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@ccsteels.com.
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@ccsteels.com.
Hot search：1.8522
Previous page：33CrMoV12-9
Last page：39CrMoV13-9 ESR
Total list
Monthly rank
- 3438NCD4
- 3424CrMo5
- 3119CrNi5
- 2938B3
- 28ASTM A739 type B11
- 2826NiCrMoV11-5
- 2742Cr4Mo2
- 24S135
- 24EN 38
- 22EN20B