35NC11
2015-09-02 20:21:23 Origin： Remark：0 Click：
35NC11 is a middle carbon high tensile, hardenability structure steel with available form of round bar, flat bar, and forging pieces produced from Steelmaking, ESR melted, Blooming, 35NC11 Forging, Hot rolling, Heat treatment, Straightening, Ultrasonic test, Cold working or Machined.
TECHNICAL SPECIFICATION DATASHEET - NF 35NC11
Official Test Certificate: issued by TUV - SGS - BV
MATERIAL CATEGORY: French inactive standard structure steel
CHEMICAL COMPOSITION (mass weight %)
C (％): 0.30 ~ 0.38
Si (％): 0.10 ~ 0.40
Si (％): 0.10 ~ 0.40
Mn (％): 0.35 ~ 0.60
P (％)≤: 0.040
S (％)≤: 0.035
Cr (％): 0.60 ~ 0.90
Ni (％): 2.50 ~ 3.00
P (％)≤: 0.040
S (％)≤: 0.035
Cr (％): 0.60 ~ 0.90
Ni (％): 2.50 ~ 3.00
Mo (%): -
TYPICAL MECHANICAL PROPERTIES
Tensile strength / σb/MPa|≥: 1130
Yield strength / σs/MPa|≥: 980
Elongation / 5(％)|≥: 10.0
Yield strength / σs/MPa|≥: 980
Elongation / 5(％)|≥: 10.0
Delivery hardness /HBS|≥: -
PRODUCT DESCRIPTION
Alloy structural steel is provided with higher yield strength, tensile strength, endurance strength, yield ratio (about 0.85 generally ) enough plasticity and toughness.
The concentration of alloy element of this kind of steel is quite high, mainly are corrosion resistant steel, heat resistant steel, wear resistant steel, and other special steels of physical and chemical properties. Alloy structural steel has preferable mechanical property than that of carbon structural steel, high performance of heat treatment especially.
The alloy is usually produced by EAF /VD /LF followed by electroslag refining (ESR) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different level according to the buyers' requirements.
Bars are usually supplied bright in the annealed condition, or bright annealing specially.
Final heat treatment - heat treatment / QT
AVAILABLE SHAPES
Round bar /Flat bar / Square bar /Tube, /Steel strip, /sheet
Bright - peeled + polishing, centerless grinding
Forged - ring, discs, shaft
TYPICAL APPLICATIONS
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Power generation – turbine fasteners – boiler support rods.
Process plant – fasteners, Mechanical gears, gear shaft, main axis, valve rod.
Process plant – fasteners, Mechanical gears, gear shaft, main axis, valve rod.
Mechanical parts - connecting rod, bolt and nut.
Multidiameter shaft, Pressure vessel.
PRODUCT PROFILE & DIMENSIONS
Round bar / Wire rod (Diameter): 5.5mm to 600mm
Square bar / Flat bar: 10mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Round bar / Wire rod (Diameter): 5.5mm to 600mm
Square bar / Flat bar: 10mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T6 - 200mm X W1000- 2500mm X L1000-12000mm
Sheet steel via cold rolled: T0.5 - 6mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com.
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com.
Hot search：35NC11
Previous page：16NCD17 / S82
Last page：35NCD2
Total list
Monthly rank
- 3438NCD4
- 3424CrMo5
- 3119CrNi5
- 2938B3
- 28ASTM A739 type B11
- 2826NiCrMoV11-5
- 2742Cr4Mo2
- 24S135
- 24EN 38
- 22EN20B