45NC2
2015-09-09 19:55:35 Origin： Remark：0 Click：
Structure steel 45NC2 Round bar, flat bar, plate, Forgings 45NC2 Steelmaking,ESR melted, Forging, Hot rolling, Heat treatment, Straightening, Ultrasonic test, Cold working or machined.
Official Test Certificate: issued by TUV - SGS - BV
TECHNICAL SPECIFICATION DATASHEET - Grade NF 45NC2
MATERIAL CATEGORY: French inactive standard structure steel
CHEMICAL COMPOSITION (mass weight %)
Carbon, C (％): 0.38 ~ 0.48
Silicon, Si (％): 0.10 ~ 0.40
Silicon, Si (％): 0.10 ~ 0.40
Manganese, Mn (％): 0.60 ~ 0.80
Phosphorus, P (％)≤: 0.040
Sulfur, S (％)≤: 0.035
Chromium, Cr (％): 0.50 ~ 0.70
Nickel, Ni (％): 0.50 ~ 0.70
Phosphorus, P (％)≤: 0.040
Sulfur, S (％)≤: 0.035
Chromium, Cr (％): 0.50 ~ 0.70
Nickel, Ni (％): 0.50 ~ 0.70
Molybdenum, Mo (%): -
Other(％): -
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Tensile strength / σb/MPa|≥: 980
Yield strength / σs/MPa|≥: 785
Elongation / 5(％)|≥: 10
Yield strength / σs/MPa|≥: 785
Elongation / 5(％)|≥: 10
Delivery hardness /HBS|≥: -
TYPICAL APPLICATIONS
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Power generation – turbine fasteners – boiler support rods.
Process plant – fasteners, Mechanical gears, gear shaft, main axis, valve rod.
Process plant – fasteners, Mechanical gears, gear shaft, main axis, valve rod.
Mechanical parts - connecting rod, bolt and nut.
Multidiameter shaft.
PRODUCT PROFILE & DIMENSIONS
Round bar / Wire rod (Diameter): 5.5mm to 800mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T6 - 200mm X W100 - 1500mm X L1000-12000mm
Sheet steel via cold rolled: T0.5 - 6mm X W60 - 1000mm X L1000 - 2000mm
Forging piece: stepped shafts, other different shapes based on OEM.
Sheet steel via cold rolled: T0.5 - 6mm X W60 - 1000mm X L1000 - 2000mm
Forging piece: stepped shafts, other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com.
Hot search：45NC2
Total list
Monthly rank
- 3438NCD4
- 3424CrMo5
- 3119CrNi5
- 2938B3
- 28ASTM A739 type B11
- 2826NiCrMoV11-5
- 2742Cr4Mo2
- 24S135
- 24EN 38
- 22EN20B