38CD4
2015-10-17 09:17:52 Origin： Remark：0 Click：
NF A35-556, A35-558 of Grade 38CD4 round bar, Ex-stock 38CD4 Forgings ESR melted, Forging, Hot rolling, Heat treatment, Straightening, Ultrasonic test, Cold working or Machined.
Official Test Certificate: issued by TUV - SGS - BV
TECHNICAL SPECIFICATION DATASHEET - Grade NF 38CD4
MATERIAL TYPE: Fasteners steel
MATERIAL STANDARDS: NF A35-556, A35-558
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (％): 0.35 ~ 0.41
Silicon, Si (％): 0.10 ~ 0.40
Silicon, Si (％): 0.10 ~ 0.40
Manganese, Mn (％): 0.60 ~ 0.90
Phosphorus, P (％)≤: 0.035
Sulfur, S (％)≤: 0.035
Phosphorus, P (％)≤: 0.035
Sulfur, S (％)≤: 0.035
Chromium, Cr (%): 0.90 ~ 1.20
Nickel, Ni (%): -
Molybdenum, Mo (%): 0.15 ~ 0.25
Other (％): -
Other (％): -
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Size: ≤25mm
Condition: + QT
Tensile strength σb≥/MPa: 980
Yield strength σs≥/MPa: 835
Elongation δ5 ≥(%): 12.0
Yield strength σs≥/MPa: 835
Elongation δ5 ≥(%): 12.0
Reduction of area ψ(％) ≥: -
TYPICAL APPLICATIONS
TYPICAL APPLICATIONS
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Power generation – turbine fasteners – boiler support rods.
Process plant – fasteners.
Process plant – fasteners.
Mechanical gears, gear shaft, main axis, valve rods.
Mechanical parts - connecting rod, bolt and nut.
Multidiameter shafts.
PROFILE & DIMENSIONS
Round bar / Wire rod (Diameter): 5.5mm to 800mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Round bar / Wire rod (Diameter): 5.5mm to 800mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T6 - 200mm X W10 - 1500mm X L1000-12000mm
Sheet steel via cold rolled: T0.5 - 6mm X W6 - 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts, other different shapes based on OEM.
Sheet steel via cold rolled: T0.5 - 6mm X W6 - 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts, other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com.
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com.
Hot search：38CD4
Total list
Monthly rank
- 3438NCD4
- 3424CrMo5
- 3119CrNi5
- 2938B3
- 28ASTM A739 type B11
- 2826NiCrMoV11-5
- 2742Cr4Mo2
- 24S135
- 24EN 38
- 22EN20B