60CrMo3
2015-11-12 15:21:03 Origin： Remark：0 Click：
NF A36-571 Specifications 60CrMo3 Round bar, Stock Available 60CrMo3 Plate ESR melted, Blooming, Hot forging, Hot rolling, Heat treatment
Official Test Certificate: issued by TUV - SGS - BV
TECHNICAL SPECIFICATION DATASHEET - NF 60CrMo3
MATERIAL TYPE: Spring steel
MATERIAL STANDARDS: NF A36-571
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (％): 0.56 ~ 0.64
Silicon, Si (％): 0.10 ~ 0.40
Manganese, Mn (％): 0.85 ~ 1.00
Phosphorus, P (％) ≤: 0.025
Sulfur, S (％) ≤: 0.025
Phosphorus, P (％) ≤: 0.025
Sulfur, S (％) ≤: 0.025
Chromium, Cr (%): 0.70 ~ 0.95
Molybdenum, Mo (%): 0.15 ~ 0.25
MECHANICAL PROPERTY UNDER ROOM TMEP.
Tensile strength σb≥/MPa: 1370
Yield strength σs≥/MPa: 1180
Yield strength σs≥/MPa: 1180
Elongation δ5 ≥(%): 6.0
Reduction of area ψ(％) ≥: -
PRODUCT DESCRIPTION
The alloy is usually produced by EAF + VD /LF + IFF + VD followed by electroslag refining (ESR) if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different level according to the buyers' requirements.
Bars are usually supplied bright in the annealed condition, or bright annealing specially.
Final heat treatment - heat treatment / QT.
TYPICAL APPLICATIONS
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Power generation – turbine fasteners – boiler support rods.
Process plant – fasteners.
Process plant – fasteners.
Mechanical gears, gear shaft, main axis, valve rods.
Mechanical parts - connecting rod, bolt and nut.
Multidiameter shafts.
PRODUCT PROFILE & DIMENSIONS
Round bar / Disc (diameter): 5.50mm to 800mm
Square bar / Flat bar: 6mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Round bar / Disc (diameter): 5.50mm to 800mm
Square bar / Flat bar: 6mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T6 - 200mm X W1000- 2500mm X L1000-12000mm
Forging piece: stepped shaft, and other different shapes based on OEM.
Forging piece: stepped shaft, and other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com.
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com.
Hot search：60CrMo3
Total list
Monthly rank
- 3438NCD4
- 3424CrMo5
- 3119CrNi5
- 2938B3
- 28ASTM A739 type B11
- 2826NiCrMoV11-5
- 2742Cr4Mo2
- 24S135
- 24EN 38
- 22EN20B