60CrMo4
2015-11-12 15:22:09 Origin： Remark：0 Click：
NF A36-571 Material Specifications Spring Steel 60CrMo4 Round bar, Flat bar, Plate ESR melted, Hot Forging, Hot rolling, Heat treatment
Official Test Certificate: issued by TUV - SGS - BV
TECHNICAL SPECIFICATION DATASHEET - NF 60CrMo4
MATERIAL TYPE: Spring steel
MATERIAL STANDARDS: NF A36-571
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (％): 0.56 ~ 0.64
Silicon, Si (％): 0.10 ~ 0.40
Manganese, Mn (％): 0.85 ~ 1.00
Phosphorus, P (％) ≤: 0.025
Sulfur, S (％) ≤: 0.025
Phosphorus, P (％) ≤: 0.025
Sulfur, S (％) ≤: 0.025
Chromium, Cr (%): 0.75 ~ 1.00
Molybdenum, Mo (%): 0.25 ~ 0.35
MECHANICAL PROPERTY UNDER ROOM TEMP.
Tensile strength σb≥/MPa: 1410
Yield strength σs≥/MPa: 1200
Yield strength σs≥/MPa: 1200
Elongation δ5 ≥(%): 5.0
Reduction of area ψ(％) ≥: -
PRODUCT DESCRIPTION
Alloy structural steel is provided with higher yield strength, tensile strength, endurance strength, yield ratio (about 0.85 generally ) enough plasticity and toughness.
The concentration of alloy element of this kind of steel is quite high, mainly are corrosion resistant steel, heat resistant steel, wear resistant steel, and other special steels of physical and chemical properties. Alloy structural steel has preferable mechanical property than that of carbon structural steel, high performance of heat treatment especially.
The alloy is usually produced by EAF + VD /LF + IFF + VD followed by electroslag refining (ESR) if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different level according to the buyers' requirements.
Bars are usually supplied bright in the annealed condition.
Final heat treatment - heat treatment / QT.
TYPICAL APPLICATIONS
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Power generation – turbine fasteners – boiler support rods.
Process plant – fasteners.
Process plant – fasteners.
Mechanical gears, gear shaft, main axis, valve rods.
Mechanical parts - connecting rod, bolt and nut.
Multidiameter shafts.
PRODUCT PROFILE & DIMENSION
Round bar / Wire rod (Diameter): 5.5mm to 800mm
Square bar / Flat bar: 6mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Round bar / Wire rod (Diameter): 5.5mm to 800mm
Square bar / Flat bar: 6mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 - 50mm X W50 - 1200mm X L1000 - 5000mm
Forging piece: stepped shafts, other different shapes based on OEM.
Forging piece: stepped shafts, other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com.
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com.
Hot search：60CrMo4
Total list
Monthly rank
- 3438NCD4
- 3424CrMo5
- 3119CrNi5
- 2938B3
- 28ASTM A739 type B11
- 2826NiCrMoV11-5
- 2742Cr4Mo2
- 24S135
- 24EN 38
- 22EN20B