46Si7 / 1.5024
2025-02-17 09:46:00 Origin： Remark：0 Click：
Spring steel 46Si7 Cold rolled steel strip, wired rod properties from Steelmaking, ESR melted, 46Si7 Hot forging, Hot rolling, Heat treatment
Official Test Certificate: issued by TUV - SGS - BV
TECHNICAL DATA SHEET - 46Si7 & 1.5024
MATERIAL TYPE: Spring Steel
MATERIAL STANDARDS: DIN 17221
CHEMICAL COMPOSITIONS (mass weight - %)
Carbon, C (％): 0.42 ~ 0.50
Silicon, Si (％): 1.50 ~ 1.80
Manganese, Mn (％): 0.50 ~ 0.80
Phosphorus, P (％) ≤: 0.025
Sulfur, S (％) ≤: 0.025
Phosphorus, P (％) ≤: 0.025
Sulfur, S (％) ≤: 0.025
Chromium, Cr (%): -
Molybdenum, Mo (%): -
Vanadium, V (%): -
Other(％): N ≤ 0.007, Cu + 10Sn -/+ 0.60
MECHANICAL PROPERTIES
Range of size/mm|flat bar: 14
Range of size / mm | round bar: -
Mechanical property ≥ σb / MPa: 1270～1470
Mechanical property ≥ σs / MPa: 1080
Mechanical property ≥ δ5 (%): 6.0
Mechanical property ≥ ψ (%): 30.0
Mechanical property ≥ Akv / J: 21
Range of size / mm | round bar: -
Mechanical property ≥ σb / MPa: 1270～1470
Mechanical property ≥ σs / MPa: 1080
Mechanical property ≥ δ5 (%): 6.0
Mechanical property ≥ ψ (%): 30.0
Mechanical property ≥ Akv / J: 21
HOT WORKING & HEAT TREATMENT
Hot working temperature / ℃: 1100~850
Thermal forming temperature /℃: 900~830
Heat treatment temperature / ℃ | annealing: 640～680
Heat treatment temperature / ℃ | normalizing: 850~880
Heat treatment temperature / ℃ | quenching: 850～880 Water
Heat treatment temperature / ℃ | tempering: 430～500
Hardness after annealing ≤ HBW: 230
Thermal forming temperature /℃: 900~830
Heat treatment temperature / ℃ | annealing: 640～680
Heat treatment temperature / ℃ | normalizing: 850~880
Heat treatment temperature / ℃ | quenching: 850～880 Water
Heat treatment temperature / ℃ | tempering: 430～500
Hardness after annealing ≤ HBW: 230
MAIN FEATURES & PERFORMANCE REQUIREMENTS
Spring steel is specialized in producing the spring and elastic components due to its elasticity under the condition of quenching and tempering. The elasticity of steel depends on its capacity of elastic deformation.
This allows objects made of spring steel to return to their original shape despite significant bending or twisting occurs.
Spriing steel should possess excellent combination property, such as mechanical property (limit of elasticity, ultimate strength, yield ratio), relaxation resistant, fatigue property, hardenability, physical and chemical property (heat resistance,low temperature resistant, antioxidation, corrosion resistance). To meet the above performance requirement, Spring steel has fine metallurgical quality ( high purity, homogeneity), excellent surface quality ( specially on surface defect and decarburization), precise external form and dimensions.
HEAT TREATMENT
Spring Steel requires higher strength and fatigue limit, usage in the condition of quenching + mesothermal tempering, then it can get higher elastic limit. Process engineering of heat treatment is very important to inherent quality of spring steel.
MANUFACTURING TECHNIQUE
General spring steels are produced in electric furnace, open hearth furnace, oxygen converter,and high quality spring steel of higher quality or special performance can be made in electro slag furnace or vacuum furnace.
PROCESSING PROPERTY
Spring Steel is commonly used in the condition of impact, vibration, or long-term stress. which makes the spring steel require higher tensile strength, limit of elasticity, fatigue strength. also requirement of definite hardenability, good surface quality, not easy decarburization.
PRODUCT PROFILE
Round bar / Wire rod (diameter): 5.50mm to 800mm
Square bar / Flat bar: 8mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Round bar / Wire rod (diameter): 5.50mm to 800mm
Square bar / Flat bar: 8mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T6 - 200mm X W1000- 2500mm X L1000-12000mm
Forging piece: stepped shafts, other different shapes based on OEM.
Forging piece: stepped shafts, other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineer.
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineer.
Previous page：38Si7
Last page：51Si7 /1.5025
Total list
Monthly rank
- 4538NCD4
- 3826NiCrMoV11-5
- 3442Cr4Mo2
- 3040Cr4
- 3024CrMo5
- 2820C15
- 24EN52 & EN 52
- 21EN 14B
- 20ASTM A739 type B11
- 1916NC6