36Mn6
2015-12-02 13:24:08 Origin： Remark：0 Click：
Specifications 36Mn6 datasheet, Inventory 36Mn6 Chemical, Stocklist suppliers 36Mn6 Properties from Steelmaking, ESR melted, Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic test, Cold working or rough turned machining. Technical specification - ISO 683-18. We also possess the advanced precision machining equipments for further processing.Please just let us know what you inquire
Official Test Certificate: issued by TUV - SGS - BV
TECHNICAL SPECIFICATION - Grade 36Mn6
MATERIAL TYPE: Quenched and tempered steel
MATERIAL STANDARDS: ISO 683/18
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.33 ~ 0.40
Si (％): 0.10 ~ 0.40
Mn (％): 1.30 ~ 1.60
P (％)≤: 0.035
S (％)≤: 0.035
Cr (%): -
Mo (%): -
MECHANICAL PROPERTIES UNDER DIFFERENT CONDITIONS
Diameter ≤ /size mm: 16
Mechanical property ≥|σb/MPa: 850~1000
Mechanical property ≥|σs/MPa: 640
Mechanical property ≥|δ5(%): 12
Mechanical property ≥|AkU /J: 20
Mechanical property ≥|σs/MPa: 640
Mechanical property ≥|δ5(%): 12
Mechanical property ≥|AkU /J: 20
Hardness via Annealed /HBW: 229
Diameter ≤ /size mm: 16 ~ 40
Mechanical property ≥|σb/MPa: 750~900
Mechanical property ≥|σs/MPa: 540
Mechanical property ≥|δ5(%): 14
Mechanical property ≥|AkU /J: 25
Mechanical property ≥|σs/MPa: 540
Mechanical property ≥|δ5(%): 14
Mechanical property ≥|AkU /J: 25
Hardness via Annealed /HBW: 229
PRODUCT DESCRIPTION
Alloy structural steel is provided with higher yield strength, tensile strength, endurance strength, yield ratio (about 0.85 generally ) enough plasticity and toughness.
The concentration of alloy element of this kind of steel is quite high, mainly are corrosion resistant steel, heat resistant steel, wear resistant steel, and other special steels of physical and chemical properties. Alloy structural steel has preferable mechanical property than that of carbon structural steel, high performance of heat treatment especially.
The alloy is usually produced by IFF /EAF /VD /LF followed by electroslag refining (ESR) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different level according to the buyers' requirements.
Bars are usually supplied bright in the annealed condition, or bright annealing specially.
Final heat treatment - heat treatment / Quenched and Tempered.
The concentration of alloy element of this kind of steel is quite high, mainly are corrosion resistant steel, heat resistant steel, wear resistant steel, and other special steels of physical and chemical properties. Alloy structural steel has preferable mechanical property than that of carbon structural steel, high performance of heat treatment especially.
The alloy is usually produced by IFF /EAF /VD /LF followed by electroslag refining (ESR) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different level according to the buyers' requirements.
Bars are usually supplied bright in the annealed condition, or bright annealing specially.
Final heat treatment - heat treatment / Quenched and Tempered.
TYPICAL APPLICATIONS
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Power generation – turbine fasteners – boiler support rods
Process plant – fasteners
Mechanical gears, gear shaft, main axis, valve rod
Mechanical parts - connecting rod, bolt and nut
Multidiameter shaft
Pressure vessel, seamless pipe
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Power generation – turbine fasteners – boiler support rods
Process plant – fasteners
Mechanical gears, gear shaft, main axis, valve rod
Mechanical parts - connecting rod, bolt and nut
Multidiameter shaft
Pressure vessel, seamless pipe
PRODUCT PROFILE
Round bar / Wire rod (Diameter): 5.5mm to 550mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T6 - 200mm X W10 - 1500mm X L1000-12000mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Round bar / Wire rod (Diameter): 5.5mm to 550mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T6 - 200mm X W10 - 1500mm X L1000-12000mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry or help, pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com.
If you meet further on any technical enquiry or help, pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com.
Hot search：36Mn6
Previous page：41CrAlMo74
Last page：42Mn6
Total list
Monthly rank
- 3438NCD4
- 3424CrMo5
- 3119CrNi5
- 2938B3
- 28ASTM A739 type B11
- 2826NiCrMoV11-5
- 2742Cr4Mo2
- 24S135
- 24EN 38
- 22EN20B