ISO 36CrNiMo4
2015-12-03 13:12:56 Origin： Remark：0 Click：
Technical specifications 36CrNiMo4 ISO standards quenched and tempered steel, 36CrNiMo4 is widely used in ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Official Test Certificate: issued by TUV - SGS - BV
TECHNICAL SPECIFICATION DATASHEET - Grade 36CrNiMo4
MATERIAL TYPE: Quenched and tempered steel
MATERIAL STANDARDS: ISO 683/18
CHEMICAL COMPOSITION (mass weight %)
C (％): 0.32 ~ 0.40
Si (％): 0.10 ~ 0.40
Mn (％): 0.50 ~ 0.80
P (％)≤: 0.035
S (％)≤: 0.035
Cr (%): 0.90 ~ 1.20
Mo (%): 0.15 ~ 0.30
Ni (%): 0.90 ~ 1.20
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Diameter ≤ /size mm: 16
Mechanical property ≥|σb/MPa: 1100~1300
Mechanical property ≥|σs/MPa: 900
Mechanical property ≥|δ5(%): 10
Mechanical property ≥|AkU /J: 25
Mechanical property ≥|σs/MPa: 900
Mechanical property ≥|δ5(%): 10
Mechanical property ≥|AkU /J: 25
Hardness via Annealed /HBW: 248
Diameter ≤ /size mm: 16 ~ 40
Mechanical property ≥|σb/MPa: 1000~1200
Mechanical property ≥|σs/MPa: 800
Mechanical property ≥|δ5(%): 11
Mechanical property ≥|AkU /J: 30
Mechanical property ≥|σs/MPa: 800
Mechanical property ≥|δ5(%): 11
Mechanical property ≥|AkU /J: 30
Hardness via Annealed /HBW: 248
PRODUCT DESCRIPTION
Alloy structural steel is provided with higher yield strength, tensile strength, endurance strength, yield ratio (about 0.85 generally ) enough plasticity and toughness.
The alloy is usually produced by IFF /EAF /VD /LF followed by electroslag refining (ESR) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different level according to the buyers' requirements.
Bars are usually supplied bright in the annealed condition.
Final heat treatment - heat treatment / Quenched and Tempered.
The alloy is usually produced by IFF /EAF /VD /LF followed by electroslag refining (ESR) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different level according to the buyers' requirements.
Bars are usually supplied bright in the annealed condition.
Final heat treatment - heat treatment / Quenched and Tempered.
TYPICAL APPLICATIONS
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Power generation – turbine fasteners – boiler support rods
Process plant – fasteners, Mechanical gears, gear shaft, main axis, valve rod.
Mechanical parts - connecting rod, bolt and nut, Multidiameter shaft, Pressure vessel.
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Power generation – turbine fasteners – boiler support rods
Process plant – fasteners, Mechanical gears, gear shaft, main axis, valve rod.
Mechanical parts - connecting rod, bolt and nut, Multidiameter shaft, Pressure vessel.
PRODUCT PROFILE & DIMENSIONS
Round bar / Wire rod (Diameter): 5.5 to 800mm
Square bar / Flat bar: 10 to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T6 - 200mm X W1000- 2500mm X L1000-12000mm
Forging piece: stepped shafts / other different shapes based on OEM.
Round bar / Wire rod (Diameter): 5.5 to 800mm
Square bar / Flat bar: 10 to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T6 - 200mm X W1000- 2500mm X L1000-12000mm
Forging piece: stepped shafts / other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineer.
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineer.
Total list
Monthly rank
- 3438NCD4
- 3424CrMo5
- 3119CrNi5
- 2938B3
- 28ASTM A739 type B11
- 2826NiCrMoV11-5
- 2742Cr4Mo2
- 24S135
- 24EN 38
- 22EN20B