36CrNiMo6
2015-12-03 13:29:05 Origin： Remark：0 Click：
Technical specification - ISO 683/18 of 36CrNiMo6, a middle-carbon high tensile 1200 MPa, superior hardenability quenched and tempered 36CrNiMo6 steel
Official Test Certificate: issued by TUV - SGS - BV
TECHNICAL DATA SHEET - Grade 36CrNiMo6
MATERIAL TYPE - Quenched and tempered steel
MELTING PROCESS - EAF + VD + LF / BEF + ESR
H S CODE For Customs - 7228 4000 / 7228 5000 / 7228 6000
MATERIAL STANDARDS - ISO 683/18
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (％): 0.32 ~ 0.39
Silicon, Si (％): 0.10 ~ 0.40
Manganese, Mn (％): 0.50 ~ 0.80
Phosphorus, P (％)≤: 0.035
Sulfur, S (％)≤: 0.035
Chromium, Cr (%): 1.30 ~ 1.70
Molybdenum, Mo (%): 0.15 ~ 0.30
Nickel, Ni (%): 1.30 ~ 1.70
Carbon, C (％): 0.32 ~ 0.39
Silicon, Si (％): 0.10 ~ 0.40
Manganese, Mn (％): 0.50 ~ 0.80
Phosphorus, P (％)≤: 0.035
Sulfur, S (％)≤: 0.035
Chromium, Cr (%): 1.30 ~ 1.70
Molybdenum, Mo (%): 0.15 ~ 0.30
Nickel, Ni (%): 1.30 ~ 1.70
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Diameter ≤ /size mm: 16
Mechanical property ≥|σb/MPa: 1200~1400
Mechanical property ≥|σs/MPa: 1000
Mechanical property ≥|δ5(%): 9.0
Mechanical property ≥|AkU /J: 20.0
Mechanical property ≥|σs/MPa: 1000
Mechanical property ≥|δ5(%): 9.0
Mechanical property ≥|AkU /J: 20.0
Hardness via Annealed /HBW: 248
Diameter ≤ /size mm: 16 ~ 40
Mechanical property ≥|σb/MPa: 1100~1300
Mechanical property ≥|σs/MPa: 900
Mechanical property ≥|δ5(%): 10.0
Mechanical property ≥|AkU /J: 25
Mechanical property ≥|σs/MPa: 900
Mechanical property ≥|δ5(%): 10.0
Mechanical property ≥|AkU /J: 25
Hardness via Annealed /HBW: 248
PRODUCT DESCRIPTION
Alloy structural steel is provided with higher yield strength, tensile strength, endurance strength, yield ratio (about 0.85 generally ) enough plasticity and toughness.
The concentration of alloy element of this kind of steel is quite high, mainly are corrosion resistant steel, heat resistant steel, wear resistant steel, and other special steels of physical and chemical properties. Alloy structural steel has preferable mechanical property than that of carbon structural steel, high performance of heat treatment especially.
The alloy is usually produced by IFF /EAF /VD /LF followed by electroslag refining (ESR) if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different level according to the buyers' requirements.
Bars are usually supplied bright in the annealed condition, or bright annealing specially.
Final heat treatment - Quenched and Tempered.
The concentration of alloy element of this kind of steel is quite high, mainly are corrosion resistant steel, heat resistant steel, wear resistant steel, and other special steels of physical and chemical properties. Alloy structural steel has preferable mechanical property than that of carbon structural steel, high performance of heat treatment especially.
The alloy is usually produced by IFF /EAF /VD /LF followed by electroslag refining (ESR) if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different level according to the buyers' requirements.
Bars are usually supplied bright in the annealed condition, or bright annealing specially.
Final heat treatment - Quenched and Tempered.
TYPICAL APPLICATIONS
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Power generation – turbine fasteners – boiler support rods
Process plant – fasteners, Mechanical gears, gear shaft, main axis, valve rod.
Mechanical parts - connecting rod, bolt and nut, Multidiameter shaft, Pressure vessel.
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Power generation – turbine fasteners – boiler support rods
Process plant – fasteners, Mechanical gears, gear shaft, main axis, valve rod.
Mechanical parts - connecting rod, bolt and nut, Multidiameter shaft, Pressure vessel.
PRODUCT PROFILE & DIMENSIONS
Round bar / Wire rod (Diameter): 5.5mm to 450mm
Square bar / Flat bar: 3mm to 610mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T30 - 350mm X W50 - 1000mm X L1000-12000mm
Forging piece: stepped shafts, other different shapes based on OEM.
Round bar / Wire rod (Diameter): 5.5mm to 450mm
Square bar / Flat bar: 3mm to 610mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T30 - 350mm X W50 - 1000mm X L1000-12000mm
Forging piece: stepped shafts, other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, E-mail: sales@ccsteels.com.
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, E-mail: sales@ccsteels.com.
Hot search：36CrNiMo6
Previous page：ISO 36CrNiMo4
Last page：1.6722
Total list
Monthly rank
- 3438NCD4
- 3424CrMo5
- 3119CrNi5
- 2938B3
- 28ASTM A739 type B11
- 2826NiCrMoV11-5
- 2742Cr4Mo2
- 24S135
- 24EN 38
- 22EN20B