55SiCr6-3
2015-12-19 14:30:12 Origin： Remark：0 Click：
ISO 683/14 Specifications 55SiCr6-3 Round bar Inventory 55SiCr6-3 Flat bar, Plate Steelmaking, ESR melted, Blooming, Hot forging, Hot rolling, Heat treatment
Official Test Certificate: issued by TUV - SGS - BV
TECHNICAL SPECIFICATIONS - Grade 55SiCr6-3
MATERIAL TYPE - Spring steel
MATERIAL STANDARDS - ISO 683/14
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (％): 0.51 ~ 0.59
Silicon, Si (％): 1.20 ~ 1.60
Manganese, Mn (％): 0.50 ~ 0.80
Phosphorus, P (％)≤: 0.035
Sulfur, S (％)≤: 0.035
Chromium, Cr (%): 0.50 ~ 0.80
Cu + 10Sn ≤ 0.60
MECHANICAL PROPERTIES UNDER HEAT TREATMENT
Condition: Quenched and tempered
Mechanical property ≥|σs/MPa: 1450~1750
Mechanical property ≥|σb/MPa: 1300
Mechanical property ≥|δ5(%): 6.0
Hardness after soft annealing ≤HBW: 248
HEAT TREATMENT
Spring steel requires higher strength and fatigue limit, usage in the condition of quenching + mesothermal tempering, then it can get higher elastic limit. Process engineering of heat treatment is very important to inherent quality of spring steel.
MANUFACTURING TECHNIQUE
General spring steels are produced in electric furnace, open hearth furnace, oxygen converter,and high quality spring steel of higher quality or special performance can be made in electro slag furnace or vacuum furnace
PROCESSING PROPERTY
Spring steel is commonly used in the condition of impact, vibration, or long-term stress. which makes the spring steel require higher tensile strength, limit of elasticity, fatigue strength. also requirement of definite hardenability, good surface quality, not easy decarburization. Spring steel should possess excellent combination property, such as mechanical property (limit of elasticity, ultimate strength, yield ratio), relaxation resistant, fatigue property, hardenability, physical and chemical property (heat resistance,low temperature resistant, antioxidation, corrosion resistance). To meet the above performance requirement, Spring steel has fine metallurgical quality ( high purity, homogeneity), excellent surface quality ( specially on surface defect and decarburization), precise external form and dimensions.
PRODUCT PROFILE & DIMENSIONS
Round bar / wire rod (diameter): 5.5mm to 450mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email us:
Hot search：55SiCr6-3
Previous page：52CrMoV4
Last page：55SiCrV6-3
Total list
Monthly rank
- 3438NCD4
- 3424CrMo5
- 3119CrNi5
- 2938B3
- 28ASTM A739 type B11
- 2826NiCrMoV11-5
- 2742Cr4Mo2
- 24S135
- 24EN 38
- 22EN20B