100Cr6 / B1
2015-12-24 13:12:34 Origin： Remark：0 Click：
Technical specification ISO standards Bearing steel 100Cr6 Plate, Round bar 100Cr6 strip coil, Flat bar Steelmaking, ESR melted, Blooming, Hot forging
Official Test Certificate: issued by TUV - SGS - BV
TECHNICAL SPECIFICATIONS - Grade 100Cr6 & B1
MATERIAL TYPE: Quenched bearing steel
MATERIAL STANDARDS: ISO 683/17
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (％): 0.93 ~ 1.05
Silicon, Si (％): 0.15 ~ 0.35
Manganese, Mn (％): 0.25 ~ 0.45
Phosphorus, P (％)≤: 0.025
Sulfur, S (％)≤: 0.015
Chromium, Cr (%): 1.35 ~ 1.60
Molybdenum, Mo (%): ≤ 0.10
Nickel, Ni (%): -
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Condition: + AC
Hardness /≤HBW: 207
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Condition: + AC
Hardness /≤HBW: 207
CLASSIFICATION AND APPLICATION
Bearing steel is a type of steel used in the field of fabricating the ball, pin roller, sleeve for antifriction bearing. and also measuring implements, cold-punching die, lead screw and precision components of diesel engine oil pump. Bearing steel is divided into high-carbon chromium bearing steel, carburizing bearing steel, stainless bearing steel, high temperature bearing steel, medium-carbon bearing steel.
Generally, condition of delivery is hot rolled+annealing, cold drawn+annealing.
PRODUCT DESCRIPTION
The alloy is usually produced by LF /EAF /IFF /VD followed by electroslag refining (ESR) if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
PRODUCT PROFILE
Round bar (diameter): 5.5mm to 300mm
Square bar / Flat bar: 10mm to 500mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T6 ~ 400mm X W10 ~ 1000mm X L1000 ~ 5000mm
Steel strip: 0.5 ~ 10 * 10 ~ 200 * Lmm
Bearing steel is a type of steel used in the field of fabricating the ball, pin roller, sleeve for antifriction bearing. and also measuring implements, cold-punching die, lead screw and precision components of diesel engine oil pump. Bearing steel is divided into high-carbon chromium bearing steel, carburizing bearing steel, stainless bearing steel, high temperature bearing steel, medium-carbon bearing steel.
Generally, condition of delivery is hot rolled+annealing, cold drawn+annealing.
PRODUCT DESCRIPTION
The alloy is usually produced by LF /EAF /IFF /VD followed by electroslag refining (ESR) if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
PRODUCT PROFILE
Round bar (diameter): 5.5mm to 300mm
Square bar / Flat bar: 10mm to 500mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T6 ~ 400mm X W10 ~ 1000mm X L1000 ~ 5000mm
Steel strip: 0.5 ~ 10 * 10 ~ 200 * Lmm
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineer. E-mail: lh.steel@hotmail.com
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineer. E-mail: lh.steel@hotmail.com
Previous page：60Si8
Last page：2Cr13Mn9Ni4 Bar, 2Cr13Mn9Ni4 property
Total list
Monthly rank
- 3438NCD4
- 3424CrMo5
- 3119CrNi5
- 2938B3
- 28ASTM A739 type B11
- 2826NiCrMoV11-5
- 2742Cr4Mo2
- 24S135
- 24EN 38
- 22EN20B