13CrMo9-10
2016-02-08 15:57:55 Origin： Remark：0 Click：
Stocklist 13CrMo9-10 Round bar, Plate 13CrMo9-10 Flat bar, Stock Available ESR melted, Blooming, Hot forging, Hot rolling, Heat treatment
TECHNICAL DATA SHEET - 13CrMo9-10
Official Test Certificate Report: issued by TUV - SGS - BV
MATERIAL TYPE: Steel plate for pressure vessel
MATERIAL STANDARDS: ISO 9328 2~6 -2004
CHEMICAL COMPOSITION (mass weight - % )
Carbon, C (％): ≤ 0.17
Silicon, Si (％): ≤ 0.50
MATERIAL STANDARDS: ISO 9328 2~6 -2004
CHEMICAL COMPOSITION (mass weight - % )
Carbon, C (％): ≤ 0.17
Silicon, Si (％): ≤ 0.50
Manganese, Mn (％): 0.30 ~ 0.60
Phosphorus, P (％) ≤: 0.030
Sulfur, S (％) ≤: 0.030
Chromium, Cr (%): 2.00 ~ 2.50
Phosphorus, P (％) ≤: 0.030
Sulfur, S (％) ≤: 0.030
Chromium, Cr (%): 2.00 ~ 2.50
Molybdenum, Mo (%): 0.90 ~ 1.10
Nickel, Ni (%): ≤ 0.40
Vanadium, V (%): ≤ 0.03
Other (%): Ti ≤ 0.03, Cu ≤0.40, Nb ≤0.02
PRODUCT DESCRIPTION
The concentration of alloy element of this kind of steel is quite high, mainly are corrosion resistant steel, heat resistant steel, wear resistant steel, and other special steels of physical and chemical properties. Alloy structural steel has preferable mechanical property than that of carbon structural steel, high performance of heat treatment especially.
The alloy is usually produced by IFF /EAF /VD /LF followed by electroslag refining (ESR) if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different level according to the buyers' requirements.
Bars are usually supplied bright in the annealed condition, or bright annealing specially.
Final heat treatment - quenched and tempered.
The alloy is usually produced by IFF /EAF /VD /LF followed by electroslag refining (ESR) if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different level according to the buyers' requirements.
Bars are usually supplied bright in the annealed condition, or bright annealing specially.
Final heat treatment - quenched and tempered.
TYPICAL APPLICATIONS
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Power generation – turbine fasteners – boiler support rods.
Process plant – fasteners.
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Power generation – turbine fasteners – boiler support rods.
Process plant – fasteners.
Mechanical gears, gear shaft, main axis, valve rod.
Mechanical parts - connecting rod, bolt and nut.
Multidiameter shaft, Pressure vessel.
Mechanical parts - connecting rod, bolt and nut.
Multidiameter shaft, Pressure vessel.
PRODUCT PROFILE & DIMENSIONS
Heavy/middle plate via hot rolled: T60 - 400mm X W50 - 1200mm X L1000 - 5000mm
Heavy/middle plate via hot rolled: T60 - 400mm X W50 - 1200mm X L1000 - 5000mm
Length: Fixed length or random length or based on the customer's special requirement.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry or help, pleased to EMAIL our resident team of qualified production engineers. Email: sales@ccsteels.com
If you meet further on any technical enquiry or help, pleased to EMAIL our resident team of qualified production engineers. Email: sales@ccsteels.com
Hot search：13CrMo9-10
Previous page：Z1CNDA12-09
Last page：X2NiCoMoTi18-8-5
Total list
Monthly rank
- 3438NCD4
- 3424CrMo5
- 3119CrNi5
- 2938B3
- 28ASTM A739 type B11
- 2826NiCrMoV11-5
- 2742Cr4Mo2
- 24S135
- 24EN 38
- 22EN20B