12Ni14
2016-02-22 14:59:40 Origin： Remark：0 Click：
Specifications 12Ni14 Data sheet, Description 12Ni14 Chemical, Stocklist 12Ni14 properties from Steelmaking, ESR melted, Blooming, Hot forging, Hot rolling, Heat treatment
TECHNICAL DATA SHEET - Grade 12Ni14
Official Test Certificate Report: issued by TUV - SGS - BV
MATERIAL TYPE: Nickel alloy steel plate for pressure vessel
MATERIAL STANDARDS: ISO 9328/4 - 2004
CHEMICAL COMPOSITION (mass weight - %)
Carbpm. C (％): ≤ 0.15
Silicon, Si (％): ≤ 0.35
MATERIAL STANDARDS: ISO 9328/4 - 2004
CHEMICAL COMPOSITION (mass weight - %)
Carbpm. C (％): ≤ 0.15
Silicon, Si (％): ≤ 0.35
Manganese, Mn (％): 0.30 ~ 0.80
Phosphorus, P (％)≤: 0.020
Sulfur, S (％)≤: 0.015
Chromium, Cr (%): -
Phosphorus, P (％)≤: 0.020
Sulfur, S (％)≤: 0.015
Chromium, Cr (%): -
Molybdenum, Mo (%): -
Nickel, Ni (%): 3.25 ~ 3.75
Vanadium, V (%): ≤ 0.05
Other (%): Cr + Cu + Mo ≤ 0.50
PRODUCT DESCRIPTION
Alloy structural steel is provided with higher yield strength, tensile strength, endurance strength, yield ratio (about 0.85 generally ) enough plasticity and toughness.
The concentration of alloy element of this kind of steel is quite high, mainly are corrosion resistant steel, heat resistant steel, wear resistant steel, and other special steels of physical and chemical properties. Alloy structural steel has preferable mechanical property than that of carbon structural steel, high performance of heat treatment especially.
The alloy is usually produced by IFF /EAF /VD /LF followed by electroslag refining (ESR) if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different level according to the buyers' requirements.
Bars are usually supplied bright in the annealed condition, or bright annealing specially.
Final heat treatment - heat treatment / Quenched and Tempered.
The concentration of alloy element of this kind of steel is quite high, mainly are corrosion resistant steel, heat resistant steel, wear resistant steel, and other special steels of physical and chemical properties. Alloy structural steel has preferable mechanical property than that of carbon structural steel, high performance of heat treatment especially.
The alloy is usually produced by IFF /EAF /VD /LF followed by electroslag refining (ESR) if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different level according to the buyers' requirements.
Bars are usually supplied bright in the annealed condition, or bright annealing specially.
Final heat treatment - heat treatment / Quenched and Tempered.
TYPICAL APPLICATIONS
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Power generation – turbine fasteners – boiler support rods
Process plant – fasteners
Mechanical gears, gear shaft, main axis, valve rod
Mechanical parts - connecting rod, bolt and nut
Multidiameter shaft
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Power generation – turbine fasteners – boiler support rods
Process plant – fasteners
Mechanical gears, gear shaft, main axis, valve rod
Mechanical parts - connecting rod, bolt and nut
Multidiameter shaft
PRODUCT DESCRIPTION
The alloy is usually produced by EAF+LF+VD / EF followed by electroslag refining (ESR) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
PRODUCT PROFILE
Heavy/middle plate via hot rolled: T10 - 350mm X W10 - 2500mm X L1000-12000mm
The alloy is usually produced by EAF+LF+VD / EF followed by electroslag refining (ESR) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
PRODUCT PROFILE
Heavy/middle plate via hot rolled: T10 - 350mm X W10 - 2500mm X L1000-12000mm
Length: Fixed length or random length or based on the customer's special requirement. TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry or help, pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com.
If you meet further on any technical enquiry or help, pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com.
Hot search：12Ni14
Previous page：11MnNi5-3
Last page：X20Cr13 / NF Z20C13
Total list
Monthly rank
- 3438NCD4
- 3424CrMo5
- 3119CrNi5
- 2938B3
- 28ASTM A739 type B11
- 2826NiCrMoV11-5
- 2742Cr4Mo2
- 24S135
- 24EN 38
- 22EN20B