PH26
2016-03-06 18:18:45 Origin： Remark：0 Click：
Technical specifications of ISO standards seamless steel pipes for pressure purposes ISO PH26 datasheet, PH26 Chemical compositions, mechanical properties from Steelmaking, ESR melted, Blooming, PH26 Hot forging, PH26 Hot rolling, Heat treatment, Straightening, 100% Ultrasonic test, Cold working or rough turned machining. Technical specification - ISO 9329 -2 (1997). We also possess the advanced precision machining equipments for catering for your different special requirements.
TECHNICAL DATA SHEET - PH26
Official Test Certificate Report: issued by TUV - SGS - BV
Official Test Certificate Report: issued by TUV - SGS - BV
MATERIAL TYPE: Seamless steel tubes for pressure purposes
MATERIAL STANDARDS: ISO 9329-2 - 1997
CHEMICAL COMPOSITION (WEIGHT %)
C (％): ≤ 0.21
Si (％): 0.10~0.35
MATERIAL STANDARDS: ISO 9329-2 - 1997
CHEMICAL COMPOSITION (WEIGHT %)
C (％): ≤ 0.21
Si (％): 0.10~0.35
Mn (％): 0.40~1.20
P (％)≤: 0.035
S (％)≤: 0.035
Cr (%): -
P (％)≤: 0.035
S (％)≤: 0.035
Cr (%): -
Mo (%): -
Ni (%): -
Other (%): Cu ≤0.40
PRODUCT DESCRIPTION
Alloy structural steel is provided with higher yield strength, tensile strength, endurance strength, yield ratio (about 0.85 generally ) enough plasticity and toughness.
The concentration of alloy element of this kind of steel is quite high, mainly are corrosion resistant steel, heat resistant steel, wear resistant steel, and other special steels of physical and chemical properties. Alloy structural steel has preferable mechanical property than that of carbon structural steel, high performance of heat treatment especially.
The concentration of alloy element of this kind of steel is quite high, mainly are corrosion resistant steel, heat resistant steel, wear resistant steel, and other special steels of physical and chemical properties. Alloy structural steel has preferable mechanical property than that of carbon structural steel, high performance of heat treatment especially.
TYPICAL APPLICATIONS
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Power generation – turbine fasteners – boiler support rods
Process plant – fasteners
Mechanical gears, gear shaft, main axis, valve rod
Mechanical parts - connecting rod, bolt and nut
Multidiameter shaft
Pressure vessel, seamless pipe
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Power generation – turbine fasteners – boiler support rods
Process plant – fasteners
Mechanical gears, gear shaft, main axis, valve rod
Mechanical parts - connecting rod, bolt and nut
Multidiameter shaft
Pressure vessel, seamless pipe
PRODUCT MELTING PROCESS
The alloy is usually produced by LF /EAF /IFF /VD followed by electroslag refining (ESR) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
PRODUCT PROFILE
Round bar (Diameter): 0.50mm to 800mm
Square bar / Flat bar: 3mm to 800mm
Length: random length, fixed length or based on the customer's special requirement.
The alloy is usually produced by LF /EAF /IFF /VD followed by electroslag refining (ESR) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
PRODUCT PROFILE
Round bar (Diameter): 0.50mm to 800mm
Square bar / Flat bar: 3mm to 800mm
Length: random length, fixed length or based on the customer's special requirement.
Seamless steel pipes: OD6 ~ 219 X THK 1~ 15mm, Random length or fixed length.
Steel strip: T0.20 ~ 3mm X W10 ~ 2000mm X Coil
Heavy/middle plate via hot rolled: T4 - 200mm X W1000- 2500mm X L1000-12000mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Steel strip: T0.20 ~ 3mm X W10 ~ 2000mm X Coil
Heavy/middle plate via hot rolled: T4 - 200mm X W1000- 2500mm X L1000-12000mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry or help. pleased to EMAIL our resident team of qualified production engineers.
- Email: lh.steel@hotmail.com
Hot search：PH26
Previous page：PH23
Last page：Carpenter 158
Total list
Monthly rank
- 3438NCD4
- 3424CrMo5
- 3119CrNi5
- 2938B3
- 28ASTM A739 type B11
- 2826NiCrMoV11-5
- 2742Cr4Mo2
- 24S135
- 24EN 38
- 22EN20B