ISO 13CrMo4-5
2016-03-30 21:00:48 Origin： Remark：0 Click：
Description 13CrMo4-5 Ex-stock, Inventory 13CrMo4-5 Suppliers, Round bars 13CrMo4-5 Property from Steelmaking, ESR melted, Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic test, Cold working or rough turned machining. Technical specification - ISO 9329 -2 (1997). We also possess the advanced precision machining equipments for catering for your different special requirements.
TECHNICAL DATA SHEET - Grade ISO 13CrMo4-5
Official Test Certificate Report: issued by TUV - SGS - BV
MATERIAL TYPE - Seamless steel tubes for pressure purposes
MATERIAL STANDARDS - ISO 9329-2 - 1997
MATERIAL STANDARDS - ISO 9329-2 - 1997
MELTING PROCESS - EAF + VD + LF / BEF + ESR
H S CODE For Customs - 7228 4000 / 7228 5000 / 7228 6000
CHEMICAL COMPOSITION ( Mass weight - %)
C (％): 0.10 ~ 0.17
Si (％): 0.15 ~ 0.35
H S CODE For Customs - 7228 4000 / 7228 5000 / 7228 6000
CHEMICAL COMPOSITION ( Mass weight - %)
C (％): 0.10 ~ 0.17
Si (％): 0.15 ~ 0.35
Mn (％): 0.40 ~ 0.70
P (％)≤: 0.035
S (％)≤: 0.035
Cr (%): 0.70 ~ 1.10
P (％)≤: 0.035
S (％)≤: 0.035
Cr (%): 0.70 ~ 1.10
Mo (%): 0.45 ~ 0.65
Ni (%): -
Other (%): Cu ≤ 0.25, Al ≥ 0.020
PRODUCT DESCRIPTION
Alloy structural steel is provided with higher yield strength, tensile strength, endurance strength, yield ratio (about 0.85 generally ) enough plasticity and toughness.
The concentration of alloy element of this kind of steel is quite high, mainly are corrosion resistant steel, heat resistant steel, wear resistant steel, and other special steels of physical and chemical properties. Alloy structural steel has preferable mechanical property than that of carbon structural steel, high performance of heat treatment especially.
The concentration of alloy element of this kind of steel is quite high, mainly are corrosion resistant steel, heat resistant steel, wear resistant steel, and other special steels of physical and chemical properties. Alloy structural steel has preferable mechanical property than that of carbon structural steel, high performance of heat treatment especially.
TYPICAL APPLICATIONS
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Power generation – turbine fasteners – boiler support rods
Process plant – fasteners
Mechanical gears, gear shaft, main axis, valve rod
Mechanical parts - connecting rod, bolt and nut
Multidiameter shaft
Pressure vessel
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Power generation – turbine fasteners – boiler support rods
Process plant – fasteners
Mechanical gears, gear shaft, main axis, valve rod
Mechanical parts - connecting rod, bolt and nut
Multidiameter shaft
Pressure vessel
PRODUCT MELTING PROCESS
The alloy is usually produced by EAF + LF + VD / BEF followed by electroslag refining (ESR) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
PRODUCT PROFILE & DIMENSIONS
Round bar (Diameter): 5.5mm to 800mm
Square bar / Flat bar: 10mm to 800mm
Length: random length, fixed length or based on the customer's special requirement.
The alloy is usually produced by EAF + LF + VD / BEF followed by electroslag refining (ESR) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
PRODUCT PROFILE & DIMENSIONS
Round bar (Diameter): 5.5mm to 800mm
Square bar / Flat bar: 10mm to 800mm
Length: random length, fixed length or based on the customer's special requirement.
Seamless steel pipes: OD6 ~ 219 X THK 1~ 15mm, Random length or fixed length.
Steel strip: T0.20 ~ 3mm X W10 ~ 2000mm X Coil
Heavy/middle plate via hot rolled: T60 - 400mm X W100 - 1200mm X L1000 - 5000mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Steel strip: T0.20 ~ 3mm X W10 ~ 2000mm X Coil
Heavy/middle plate via hot rolled: T60 - 400mm X W100 - 1200mm X L1000 - 5000mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry or help. pleased to EMAIL our resident team of qualified production engineers. Email: sales@ccsteels.com
If you meet further on any technical enquiry or help. pleased to EMAIL our resident team of qualified production engineers. Email: sales@ccsteels.com
Previous page：C70U/C70W1/1.1520
Last page：40NiMoCr10-4
Total list
Monthly rank
- 3438NCD4
- 3424CrMo5
- 3119CrNi5
- 2938B3
- 28ASTM A739 type B11
- 2826NiCrMoV11-5
- 2742Cr4Mo2
- 24S135
- 24EN 38
- 22EN20B