AISI E2515 & SAE 2515
2016-04-11 11:59:56 Origin： Remark：0 Click：
Alloy structural steel AISI E2515 Round bar, flat bar, Plate SAE 2515 ESR melted, Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic test, Cold working.
TECHNICAL DATA SHEET - Grade AISI E2515 & SAE 2515
MATERIAL CATEGORY: SAE, AISI, UNS system alloy structural steel
MATERIAL SPECIFICATIONS: SAE J1249 -2000
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
CHEMICAL COMPOSITION (mass weight %)
Carbon, C (％): 0.12 ~ 0.17
CHEMICAL COMPOSITION (mass weight %)
Carbon, C (％): 0.12 ~ 0.17
Silicon, Si (%): 0.20 ~ 0.35
Manganese, Mn (％): 0.40 ~ 0.60
Manganese, Mn (％): 0.40 ~ 0.60
Phosphorus, P (％)≤: 0.040
Sulfur, S (％)≤: 0.040
Sulfur, S (％)≤: 0.040
Chromium, Cr (%): -
Nickel, Ni (%): 4.75 ~ 5.25
Molybdenum, Mo (%): -
MECHANICAL PROPERTIES AND HOT WORKING
Mechanical property ≥ σb/MPa: 520
Mechanical property ≥ σs/MPa: 385
Mechanical property ≥ δ5 (%): 19
Mechanical property ≥ ψ (％): 50
Mechanical property ≥ σs/MPa: 385
Mechanical property ≥ δ5 (%): 19
Mechanical property ≥ ψ (％): 50
Hot working temperature /℃: 1100～850
MAIN FEATURES AND MELTING PROCESS
The steels shall be manufactured by melting process EF, LF + EAF+ VD, IFF + ESR Melted. VIM + ESR can be handled by agreement. Forgings may be furnished in one of the following conditions: stress relieving; annealing; solution treatment; solution treatment and ageing; normalizing; normalizing and tempering; or quenching and tempering.
TYPICAL APPLICATIONS
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Power generation – turbine fasteners – boiler support rods.
Process plant – fasteners, Mechanical gears, gear shaft, main axis, valve rods.
Mechanical parts - connecting rods, bolts and nuts, Multidiameter shafts.
PRODUCT PROFILE AND DIMENSIONS
Round bar (Diameter): 5.5mm to 550mm
Square bar / Flat bar: 10mm to 800mm
Steel strip: T0.20 ~ 3mm X W10 ~ 2000mm X Coil
Heavy/middle plate via hot rolled: T4 - 200mm X W1000- 2500mm X L1000-12000mm
Forging piece: stepped shafts.
The steels shall be manufactured by melting process EF, LF + EAF+ VD, IFF + ESR Melted. VIM + ESR can be handled by agreement. Forgings may be furnished in one of the following conditions: stress relieving; annealing; solution treatment; solution treatment and ageing; normalizing; normalizing and tempering; or quenching and tempering.
TYPICAL APPLICATIONS
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Power generation – turbine fasteners – boiler support rods.
Process plant – fasteners, Mechanical gears, gear shaft, main axis, valve rods.
Mechanical parts - connecting rods, bolts and nuts, Multidiameter shafts.
PRODUCT PROFILE AND DIMENSIONS
Round bar (Diameter): 5.5mm to 550mm
Square bar / Flat bar: 10mm to 800mm
Steel strip: T0.20 ~ 3mm X W10 ~ 2000mm X Coil
Heavy/middle plate via hot rolled: T4 - 200mm X W1000- 2500mm X L1000-12000mm
Forging piece: stepped shafts.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com.
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com.
Hot search：AISI E2515 SAE 2515 round bar plate
Previous page：AISI E2512/SAE 2512
Last page：AISI E2517/SAE 2517
Total list
Monthly rank
- 3438NCD4
- 3424CrMo5
- 3119CrNi5
- 2938B3
- 28ASTM A739 type B11
- 2826NiCrMoV11-5
- 2742Cr4Mo2
- 24S135
- 24EN 38
- 22EN20B