ASTM A579 Gr.84
2016-04-19 11:36:12 Origin： Remark：0 Click：
Technical specifications Aircraft standards high tensile strength steel ASTM A579 Grade 84 data sheet, A579 Grade.84 Chemical compositions,Mechanical property from Steelmaking,ESR melted, Blooming, Hot forging,Hot rolling,Heat treatment, Straightening, 100% Ultrasonic test, Cold working, Peeled or rough turned machining. Technical specification ASTM A579. We also possess the advanced precision machining equipments for catering for your different special requirements.
TECHNICAL DATA SHEET - ASTM A579 Gr.84
MATERIAL CATEGORY: Ultra high strength 1270 Mpa alloy steel
MATERIAL DELIVERY CONDITION: Quenched and tempered
MAIN FEATURES: A579 series VAC-ARC steel is a medium carbon, low alloy, ultra high strength 1000Mpa steel primarily designed for high strength structural applications
A579 series steel is produced by the consumable electrode vacuum arc remelting process to provide optimum cleanliness and preferred ingot structure, which in turn provide optimum transverse mechanical properties.
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.16~0.23
Si (％): ≤ 0.20
Mn (％): 0.20~0.40
P (％)≤: 0.010
S (％)≤: 0.005
Cr (％): 0.65~0.85
Ni (%): 8.50~9.50
Mo (％): 0.95~1.10
Ti (%): -
V (%): 0.06~0.12
Co (%): 4.25~4.75
Al (%): ≤ 0.020
Al (%): ≤ 0.020
MECHANICAL PROPERTIES
Mechanical properties under VIM melting
Mechanical properties under VIM melting
Tensile strength σb≥/MPa: 1270
Yield strength σs≥/MPa: 1240
Elongation δ5≥(%): 14
Reduction of area ф ≥ (％): 45
Yield strength σs≥/MPa: 1240
Elongation δ5≥(%): 14
Reduction of area ф ≥ (％): 45
MAIN FEATURES AND MELTING PROCESS
The steels shall be manufactured by melting process or VIM + ESR Melted and shall be finished by hot-worked forging.
Forgings may be furnished in one of the following conditions: stress relieving; annealing; solution treatment; solution treatment and ageing; normalizing; normalizing and tempering; or quenching and tempering.
Heat and product analyses shall be employed to assess the conformance of steels with required chemical compositions.
Forgings shall examined by tension and Charpy impact tests and conform to required mechanical properties such as yield strength, tensile strength, elongation, reduction of area, minimum room-temperature Charpy V-notch energy absorption, maximum annealed hardness, and section size capability. Nondestructive tests, such as magnetic particle, liquid penetrant, and ultrasonic inspection procedures, shall also be performed.
TYPICAL APPLICATIONS
Power generation – turbine fasteners – boiler support rods
Process plant – fasteners
Mechanical gears, gear shaft, main axis, valve rod
Multidiameter shaft
Pressure vessel
PRODUCT PROFILE AND AVAILABLE FORMS
Round bar (Diameter): 0.50mm to 800mm
Square bar / Flat bar: 3mm to 800mm
Length: random length, fixed length or based on the customer's special requirement.
Steel strip: T0.20 ~ 3mm X W10 ~ 2000mm X Coil
Heavy/middle plate via hot rolled: T4 - 200mm X W1000- 2500mm X L1000-12000mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
The steels shall be manufactured by melting process or VIM + ESR Melted and shall be finished by hot-worked forging.
Forgings may be furnished in one of the following conditions: stress relieving; annealing; solution treatment; solution treatment and ageing; normalizing; normalizing and tempering; or quenching and tempering.
Heat and product analyses shall be employed to assess the conformance of steels with required chemical compositions.
Forgings shall examined by tension and Charpy impact tests and conform to required mechanical properties such as yield strength, tensile strength, elongation, reduction of area, minimum room-temperature Charpy V-notch energy absorption, maximum annealed hardness, and section size capability. Nondestructive tests, such as magnetic particle, liquid penetrant, and ultrasonic inspection procedures, shall also be performed.
TYPICAL APPLICATIONS
Power generation – turbine fasteners – boiler support rods
Process plant – fasteners
Mechanical gears, gear shaft, main axis, valve rod
Multidiameter shaft
Pressure vessel
PRODUCT PROFILE AND AVAILABLE FORMS
Round bar (Diameter): 0.50mm to 800mm
Square bar / Flat bar: 3mm to 800mm
Length: random length, fixed length or based on the customer's special requirement.
Steel strip: T0.20 ~ 3mm X W10 ~ 2000mm X Coil
Heavy/middle plate via hot rolled: T4 - 200mm X W1000- 2500mm X L1000-12000mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers.
- Email us: lh.steel@hotmail.com
Previous page：ASTM A579 Gr.83
Last page：AISI/SAE E4135
Total list
Monthly rank
- 3438NCD4
- 3424CrMo5
- 3119CrNi5
- 2938B3
- 28ASTM A739 type B11
- 2826NiCrMoV11-5
- 2742Cr4Mo2
- 24S135
- 24EN 38
- 22EN20B