1.6368 / WB36
2016-05-27 09:17:54 Origin： Remark：0 Click：
Heat resisting steel WB36 round bar, flat bar, plate, 1.6368 Steelmaking, ESR melted, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic test, Cold working machined.
MATERIAL DATA SHEET - BS 1.6368 & WB36
MATERIAL CATEGORY: Flat products made of steels for pressure purposes
MATERIAL SPECIFICATIONS: EN 10028-2 : 2003
MATERIAL CATEGORY: Flat products made of steels for pressure purposes
MATERIAL SPECIFICATIONS: EN 10028-2 : 2003
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
CHEMICAL COMPOSITION ( mass weight % )
C (％): ≤ 0.17
CHEMICAL COMPOSITION ( mass weight % )
C (％): ≤ 0.17
Si (%): 0.25 ~ 0.50
Mn (％): 0.80 ~ 1.20
Mn (％): 0.80 ~ 1.20
P (％)≤: 0.025
S (％)≤: 0.010
Cr (%): ≤ 0.30
Ni (%): 1.00 ~ 1.30
Mo (%): 0.25 ~ 0.50
N (%): ≤ 0.020
Cu (%): 0.50 ~ 0.80
Nb (%): 0.015 ~ 0.035
Ti (%): -
V (%): -
MECHANICAL PROPERTIES AND HOT WORKING
Heat condition: + NT
Mechanical property ≥ σb/MPa: 610~780
Mechanical property ≥ σs/MPa: 430
Mechanical property ≥ δ5 (%): 16.0
Mechanical property ≥ σs/MPa: 430
Mechanical property ≥ δ5 (%): 16.0
Impact Akv J /-20℃: 27
Impact Akv J / 0℃: 34
Impact Akv J /+20℃: 40
Heat condition: + QT
Mechanical property ≥ σb/MPa: 580~740
Mechanical property ≥ σs/MPa: 410
Mechanical property ≥ δ5 (%): 16.0
Mechanical property ≥ σs/MPa: 410
Mechanical property ≥ δ5 (%): 16.0
Impact Akv J /-20℃: 27
Impact Akv J / 0℃: 34
Impact Akv J /+20℃: 40
MAIN FEATURES AND MELTING PROCESS
The steels shall be manufactured by melting process EF, LF + EAF+ VD, IFF + ESR Melted. VIM + ESR can be handled by agreement.
Forgings may be furnished in one of the following conditions: stress relieving; annealing; solution treatment; solution treatment and ageing; normalizing; normalizing and tempering; or quenching and tempering.
TYPICAL APPLICATIONS
Power generation – turbine fasteners – boiler support rods.
Process plant – fasteners.
Mechanical gears, gear shaft, main axis, valve rods.
Mechanical parts - connecting rods, bolts and nuts. Multidiameter shafts.
PRODUCT PROFILE AND SUPPLYING FORMS
Round bar (Diameter): 5.5mm to 500mm
Square bar / Flat bar: 3mm to 650mm
Length: random length, fixed length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T4 - 200mm X W10 - 1500mm X L1000-12000mm
Forging piece: stepped shafts, other different shapes based on OEM.
The steels shall be manufactured by melting process EF, LF + EAF+ VD, IFF + ESR Melted. VIM + ESR can be handled by agreement.
Forgings may be furnished in one of the following conditions: stress relieving; annealing; solution treatment; solution treatment and ageing; normalizing; normalizing and tempering; or quenching and tempering.
TYPICAL APPLICATIONS
Power generation – turbine fasteners – boiler support rods.
Process plant – fasteners.
Mechanical gears, gear shaft, main axis, valve rods.
Mechanical parts - connecting rods, bolts and nuts. Multidiameter shafts.
PRODUCT PROFILE AND SUPPLYING FORMS
Round bar (Diameter): 5.5mm to 500mm
Square bar / Flat bar: 3mm to 650mm
Length: random length, fixed length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T4 - 200mm X W10 - 1500mm X L1000-12000mm
Forging piece: stepped shafts, other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers. E-mail sakes@ccsteels.com
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers. E-mail sakes@ccsteels.com
Previous page：NiCuMoNb5-6-4
Last page：13CrMo4-5 & 1.7335
Total list
Monthly rank
- 3438NCD4
- 3424CrMo5
- 3119CrNi5
- 2938B3
- 28ASTM A739 type B11
- 2826NiCrMoV11-5
- 2742Cr4Mo2
- 24S135
- 24EN 38
- 22EN20B