BS 10CrMoVNb9-1 Stockist, BS 10CrMoVNb9-1 Equivalent Steel

BS 10CrMoVNb9-1
2016-05-27 11:48:58   Origin:   Remark:0 Click:

Material technical specification British standard flat products made of steels for pressure purposes datasheet, BS 10CrMoVNb9-1 Chemical compositions,10CrMoVNb9-1 Mechanical properties from Steelmaking,ESR melted, Blooming, Hot forging,Hot rolling,Heat treatment, Straightening, 100% Ultrasonic test, Cold working, Peeled or rough turned machining. Technical specification EN 10028-2 -2003.
MATERIAL TECHNICAL DATA SHEET - BS 10CrMoVNb9-1 
MATERIAL CATEGORY: Flat products made of steels for pressure purposes 
MATERIAL SPECIFICATIONS: EN 10028-2 : 2003
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS BV
CHEMICAL COMPOSITION (WEIGHT %)
C (%):    0.08 ~ 0.12
Si (%):    ≤ 0.50
Mn (%):  0.30 ~ 0.60
P (%)≤:  0.020  
S (%)≤:  0.005    
Cr (%):   8.00 ~ 9.50
Ni (%):    ≤ 0.30
Mo (%):  0.85 ~ 1.05
N (%):    0.030 ~ 0.070
Cu (%):   ≤ 0.30
Nb (%):   0.06 ~ 0.10
Ti (%):    -
V (%):     0.18 ~ 0.25
MECHANICAL PROPERTIES AND HOT WORKING
Heat condition:  + NT
Mechanical property ≥ σb/MPa:    520~700
Mechanical property ≥ σs/MPa:    435
Mechanical property ≥ δ5 (%):     18
Impact Akv J /-20℃:                    27
Impact Akv J / 0℃:                      34
Impact Akv J /+20℃:                   40     
MAIN FEATURES AND MELTING PROCESS
The steels
shall be manufactured by melting process EF, LF + EAF+ VD, IFF + ESR Melted. VIM + ESR can be handled by agreement.
Forgings may be furnished in one of the following conditions: stress relieving; annealing; solution treatment; solution treatment and ageing; normalizing; normalizing and tempering; or quenching and tempering.
TYPICAL APPLICATIONS
Power generation – turbine fasteners – boiler support rods
Process plant – fasteners
Mechanical gears, gear shaft, main axis, valve rods
Mechanical parts - connecting rods, bolts and nuts
Multidiameter shafts

PRODUCT PROFILE AND SUPPLYING FORMS
Round bar (Diameter): 0.50mm to 800mm
Square bar / Flat bar: 3mm to 800mm
Length: random length, fixed length or based on the customer's special requirement.
Steel strip: T0.20 ~ 3mm X W10 ~ 2000mm X Coil
Heavy/middle plate via hot rolled: T4 - 200mm X W1000- 2500mm X L1000-12000mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.  

TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers. E-mail:
lh.steel@hotmail.com 

Hot search:BS 10CrMoVNb9-1

Previous page:1.7767
Last page:1.4903

Share to: