SNCM420
2016-07-12 09:40:02 Origin： Remark：0 Click：
Structural Steel 1.8%Ni - 0.5Cr SNCM420 Round bar, flat bar, and plat Steelmaking, ESR melted, Hot forging/rolling, Heat treatment, 100% Ultrasonic test, Cold working.
MATERIAL TECHNICAL DAT SHEET - JIS SNCM420
MATERIAL CATEGORY - Japanese Standard grade alloy structural steel
MATERIAL SPECIFICATIONS - JIS G4053 -2003
OFFICIAL TEST CERTIFICATE - issued by TUV - SGS - BV
CHEMICAL COMPOSITION (mass weight %)
C (％): 0.17 ~ 0.23
CHEMICAL COMPOSITION (mass weight %)
C (％): 0.17 ~ 0.23
Si (%): 0.15 ~ 0.35
Mn (％): 0.40 ~ 0.70
Mn (％): 0.40 ~ 0.70
P (％)≤: 0.030
S (％)≤: 0.030
Cr (%): 0.40 ~ 0.60
Ni (%): 1.60 ~ 2.00
Mo (%): 0.15 ~ 0.30
Cu (%): ≤ 0.30
HEAT TREATMENT & MECHANICAL PROPERTIES
Quenched 850 ~ 900℃, oil cooled
Tempered 150 ~ 200, air cooled
Mechanical property ≥ σb/MPa: 980
Mechanical property ≥ σs/MPa: -
Mechanical property ≥ σs/MPa: -
Mechanical property ≥ δ5 (%): 15
Mechanical property ≥ ψ (％): 40
Mechanical property ≥ Akv J/cm2): 69
Hardness / COND QT.HB: 293 ~ 375
MELTING PROCESS AND APPLICATIONS
The steels shall be manufactured by melting process EF + ESR, EAF+ LF + VD, EAF+ LF + VD + ESR, IFF + ESR Melted. VIM + ESR can be handled by agreement.
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Power generation – turbine fasteners – boiler support rods
Process plant – fasteners
Mechanical gears, gear shaft, main axis, valve rods
PROFILE & DIMENSIONS
Round bar (Diameter): 5.5mm to 550mm
Square bar / Flat bar (Width X Thickness): 3mm to 800mm
Length: random length, fixed length or based on the customer's special requirement.
Steel strip: T0.20 ~ 3mm X W10 ~ 300mm X Coil
Heavy/middle plate via hot rolled: T40 - 300mm X W60 - 1200mm X L1000-12000mm
Forging piece: stepped shafts, other different shapes based on OEM requirement.
The steels shall be manufactured by melting process EF + ESR, EAF+ LF + VD, EAF+ LF + VD + ESR, IFF + ESR Melted. VIM + ESR can be handled by agreement.
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Power generation – turbine fasteners – boiler support rods
Process plant – fasteners
Mechanical gears, gear shaft, main axis, valve rods
PROFILE & DIMENSIONS
Round bar (Diameter): 5.5mm to 550mm
Square bar / Flat bar (Width X Thickness): 3mm to 800mm
Length: random length, fixed length or based on the customer's special requirement.
Steel strip: T0.20 ~ 3mm X W10 ~ 300mm X Coil
Heavy/middle plate via hot rolled: T40 - 300mm X W60 - 1200mm X L1000-12000mm
Forging piece: stepped shafts, other different shapes based on OEM requirement.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com.
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com.
Hot search：SNCM420
Total list
Monthly rank
- 3624CrMo5
- 3338NCD4
- 33EN 14B
- 3342Cr4Mo2
- 28EN33 / EN 33
- 27ASTM A739 type B11
- 22EN 38
- 22XC38
- 2231Ni10Cr3Mo6
- 2226NiCrMoV11-5