42NiCrMo16 ESR
2016-09-16 09:11:52 Origin： Remark：0 Click：
Material technical specification of high-tensile low alloy structural steel 42NiCrMo16 datasheet, 42NiCrMo16 Chemical compositions, 42NiCrMo16 Mechanical properties from Steelmaking, ESR melted, Blooming, Hot 42NiCrMo16 forging,Hot rolling, Heat treatment, Straightening, 100% Ultrasonic test, 42NiCrMo16 Cold working, Peeled or rough turned machining. We also possess the advanced precision machining equipments for catering for your different special requirements.
TECHNICAL SPECIFICATION - 42NiCrMo16 ESR
MATERIAL CATEGORY: High-strength low alloy structural steel
MATERIAL CATEGORY: High-strength low alloy structural steel
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.38 ~ 0.45
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.38 ~ 0.45
Si (%): ≤ 0.40
Mn (％): 0.20 ~ 0.50
Mn (％): 0.20 ~ 0.50
P (％)≤: 0.020
S (％)≤: 0.010
Cr (%): 0.85 ~ 1.15
Ni (%): 3.70 ~ 4.20
Mo (%): 0.40 ~ 0.60
MECHANICAL PROPERTY UNDER ROOM-TEMP.
Condition: quenching and tempering treated
Tensile strength, σb/≥ MPa: 1180
Yield strength, σ0.2/≥ MPa: 965
Elongation, δ ≥(％): 8.0
Reduction of area, ф ≥ (％): -
Hardness | HBW: -
Yield strength, σ0.2/≥ MPa: 965
Elongation, δ ≥(％): 8.0
Reduction of area, ф ≥ (％): -
Hardness | HBW: -
Hardness after soft annealing: HBW 255 Max.
PRODUCT PROFILE AND SUPPLYING FORMS
Round bar (Diameter): 0.50mm to 800mm
Square bar / Flat bar: 3mm to 800mm
Length: random length, fixed length or based on the customer's special requirement.
Steel strip: T0.20 ~ 3mm X W10 ~ 2000mm X Coil
Heavy/middle plate via hot rolled: T4 - 200mm X W1000- 2500mm X L1000-12000mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM requirement.
Round bar (Diameter): 0.50mm to 800mm
Square bar / Flat bar: 3mm to 800mm
Length: random length, fixed length or based on the customer's special requirement.
Steel strip: T0.20 ~ 3mm X W10 ~ 2000mm X Coil
Heavy/middle plate via hot rolled: T4 - 200mm X W1000- 2500mm X L1000-12000mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM requirement.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers. E-mail: lh.steel@hotmail.com
Hot search：42NiCrMo16 ESR
Previous page：42NiCrMo16 / 1.6771
Last page：39CrMoV13-9
Total list
Monthly rank
- 3438NCD4
- 3424CrMo5
- 3119CrNi5
- 2938B3
- 28ASTM A739 type B11
- 2826NiCrMoV11-5
- 2742Cr4Mo2
- 24S135
- 24EN 38
- 22EN20B