TOCT 4543 Gr. 35X
2016-11-18 11:17:13 Origin： Remark：0 Click：
Material standard specification TOCT 4543 type 35X data sheet, Grade 35X Chemical compositions, Mechanical properties from Steelmaking, ESR melted, Blooming,35X Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3. Cold working, Peeled or rough turned machining. Material technical specification TOCT 4543 - 1971.
TECHNICAL SPECIFICATION - TOCT 4543 Grade 35X
TECHNICAL SPECIFICATION: TOCT 4543 - 1971
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
MATERIAL CATEGORY: alloy structural steel - Chromium type
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.31 ~ 0.39
Si (％): 0.17 ~ 0.37
Mn (％): 0.50 ~ 0.80
P (％) ≤: 0.035
S (％) ≤: 0.035
Cr (％): 0.80 ~ 1.10
Ni (％): ≤ 0.30
Mo (％): -
Cu (%): ≤ 0.30
MECHANICAL PROPERTIES UNDER ROOM TEMPERATURE
Hot working temperarture: 1200 ~ 800 Deg.
Hot working temperarture: 1200 ~ 800 Deg.
Heat treatment: Quenching 860 Deg. oil cooling
Tempering 500 water or oil cooling
Tensile strength,σb/≥ MPa: 912
Yield strength, σ0.2/≥ MPa: 735
Elongation, δ ≥(％): 11.0
Reduction of area, ф ≥ (％): 45.0
Tensile strength,σb/≥ MPa: 912
Yield strength, σ0.2/≥ MPa: 735
Elongation, δ ≥(％): 11.0
Reduction of area, ф ≥ (％): 45.0
Impact, AK (J/cm2): 69
Annealed hardness | HBW: 197
TYPICAL APPLICATIONS
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Power generation – turbine fasteners – boiler support rods
Process plant – fasteners
Mechanical gears, gear shaft, main axis, valve rods
Mechanical parts - connecting rods, bolts and nuts
Multidiameter shafts
OFFERING FORMS AND SHAPES
Round bar (Diameter): 0.50mm to 500mm
Square bar / Flat bar: 3mm to 500mm
Steel strip: T0.20 ~ 3mm X W10 ~ 2000mm X Coil
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Annealed hardness | HBW: 197
TYPICAL APPLICATIONS
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Power generation – turbine fasteners – boiler support rods
Process plant – fasteners
Mechanical gears, gear shaft, main axis, valve rods
Mechanical parts - connecting rods, bolts and nuts
Multidiameter shafts
OFFERING FORMS AND SHAPES
Round bar (Diameter): 0.50mm to 500mm
Square bar / Flat bar: 3mm to 500mm
Steel strip: T0.20 ~ 3mm X W10 ~ 2000mm X Coil
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers.
- Email: lh.steel@hotmail.com
Previous page：A534 Grade 4817H
Last page：TOCT 4543 Gr. 38XA
Total list
Monthly rank
- 3438NCD4
- 3424CrMo5
- 3119CrNi5
- 2938B3
- 28ASTM A739 type B11
- 2826NiCrMoV11-5
- 2742Cr4Mo2
- 24S135
- 24EN 38
- 22EN20B