TOCT 4543 Gr.12XH2
2016-12-12 09:42:57 Origin： Remark：0 Click：
Material standard specification of TOCT 4543 type 12XH2 data sheet, 4543 Grade 12XH2 Chemical compositions,TOCT 4543 Gr.12XH2 Mechanical properties from Steelmaking,ESR melted,Blooming, Hot forging,TOCT 4543 Gr.12XH2 Hot rolling, Heat treatment, Straightening, 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3. Cold working, Peeled or rough turned machining. Material technical specification TOCT 4543 - 1971.
TECHNICAL SPECIFICATION - TOCT 4543 Grade 12XH2
TECHNICAL SPECIFICATION: TOCT 4543 - 1971
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
MATERIAL CATEGORY: alloy structural steel Cr - Ni type
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.09 ~ 0.16
Si (％): 0.17 ~ 0.37
Mn (％): 0.30 ~ 0.60
P (％) ≤: 0.035
S (％) ≤: 0.035
Cr (％): 0.60 ~ 0.90
Ni (％): 1.50 ~ 1.90
Mo (％): -
Cu (%): ≤ 0.30
MECHANICAL PROPERTIES UNDER ROOM TEMPERATURE
Hot working temperarture: 1200 ~ 850 Deg.
Hot working temperarture: 1200 ~ 850 Deg.
Heat treatment: Quenching 860 Deg. water or oil cooling
Tempering 180 air or oil cooling
Tensile strength,σb/≥ MPa: 785
Yield strength, σ0.2/≥ MPa: 588
Elongation, δ ≥(％): 12.0
Reduction of area, ф ≥ (％): 50.0
Tensile strength,σb/≥ MPa: 785
Yield strength, σ0.2/≥ MPa: 588
Elongation, δ ≥(％): 12.0
Reduction of area, ф ≥ (％): 50.0
Impact, AK (J/cm2): 88
Annealed hardness | HBW: 207
Annealed hardness | HBW: 207
TYPICAL APPLICATIONS
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Power generation – turbine fasteners – boiler support rods
Process plant – fasteners
Mechanical gears, gear shaft, main axis, valve rods
Mechanical parts - connecting rods, bolts and nuts
Multidiameter shafts
OFFERING FORMS AND SHAPES
Round bar (Diameter): 0.50mm to 500mm
Square bar / Flat bar: 3mm to 500mm
Steel strip: T0.20 ~ 3mm X W10 ~ 2000mm X Coil
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Power generation – turbine fasteners – boiler support rods
Process plant – fasteners
Mechanical gears, gear shaft, main axis, valve rods
Mechanical parts - connecting rods, bolts and nuts
Multidiameter shafts
OFFERING FORMS AND SHAPES
Round bar (Diameter): 0.50mm to 500mm
Square bar / Flat bar: 3mm to 500mm
Steel strip: T0.20 ~ 3mm X W10 ~ 2000mm X Coil
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers.
- Email: lh.steel@hotmail.com
Previous page：TOCT 4543 Gr 20XHP
Last page：G4309 Gr.SUS304L
Total list
Monthly rank
- 3438NCD4
- 3424CrMo5
- 3119CrNi5
- 2938B3
- 28ASTM A739 type B11
- 2826NiCrMoV11-5
- 2742Cr4Mo2
- 24S135
- 24EN 38
- 22EN20B