AIR9160C type E26-4
2016-12-12 11:19:59 Origin: Remark:0 Click:
AIR 9160C Specification Structural Steel E26-4 Round bar, Flat bar, Forgings Steelmaking, ESR melted, Blooming, Hot forging / rolling, Heat treatment
TECHNICAL SPECIFICATION - AIR 9160C type E26-4
TECHNICAL SPECIFICATION: DGA - AIR 9160/C - 1973
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS
MATERIAL CATEGORY: Low alloy structural steel
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (%): ≤ 0.18
Silicon, Si (%): ≤ 0.55
Manganese, Mn (%): ≤ 1.50
Phosphorus, P (%) ≤: 0.040
Sulfur, S (%) ≤: 0.040
Chromium, Cr (%): -
Nickel, Ni (%): -
Molybdenum, Mo (%): -
Molybdenum, Mo (%): -
Aluminum, Al (%): ≥ 0.02
MECHANICAL PROPERTIES UNDER ROOM TEMPERATURE
Tensile strength, Rm ≥ MPa: 410
Yield strength, Rp0.2 ≥ MPa: 250
Elongation, A5 ≥ (%): 23.0
Reduction of area, Z ≥ (%): -
Impact, AK (J/cm2): -
Annealed hardness | HB: 121 min.
AVAILABLE FORMS AND DIMENSIONS
Round bar / Disc (diameter): 5.5 mm to 500mm
Square bar / Flat bar: 3mm to 500mm
Steel strip: T0.20 ~ 3mm X W10 ~ 2000mm X Coil
Forging piece: stepped shafts, other different shapes based on OEM.
MECHANICAL PROPERTIES UNDER ROOM TEMPERATURE
Tensile strength, Rm ≥ MPa: 410
Yield strength, Rp0.2 ≥ MPa: 250
Elongation, A5 ≥ (%): 23.0
Reduction of area, Z ≥ (%): -
Impact, AK (J/cm2): -
Annealed hardness | HB: 121 min.
AVAILABLE FORMS AND DIMENSIONS
Round bar / Disc (diameter): 5.5 mm to 500mm
Square bar / Flat bar: 3mm to 500mm
Steel strip: T0.20 ~ 3mm X W10 ~ 2000mm X Coil
Forging piece: stepped shafts, other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL (sales@ccsteels.com) our resident team of qualified production engineers.
If you meet further on any technical enquiry. pleased to EMAIL (sales@ccsteels.com) our resident team of qualified production engineers.
Previous page:G4309 Gr.SUS304L
Last page:15CDV6
Total list
Monthly rank
- 3438NCD4
- 3424CrMo5
- 3119CrNi5
- 2938B3
- 28ASTM A739 type B11
- 2826NiCrMoV11-5
- 2742Cr4Mo2
- 24S135
- 24EN 38
- 22EN20B