AIR 9160C 36NC6
2016-12-20 08:56:11 Origin： Remark：0 Click：
Description 36NC6 Suppliers, Stocklist 36NC6 Round bar, Shaft AIR9160C Grade 36NC6 Property from Steelmaking, ESR melted, Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3. Cold working, Polishing, Centerless grinding, Peeling or rough turned machining. Material technical specification AIR 9160/C - 1973.
TECHNICAL SPECIFICATION - AIR 9160C Grade 36NC6
TECHNICAL SPECIFICATION: DGA - AIR 9160/C - 1973
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS
MATERIAL CATEGORY: Low alloy structural steel
MELTING PROCESS - Consumable electrode remelted steel
H S CODE For Customs - 7228 4000 / 7228 5000 / 7228 6000
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.30 ~ 0.37
Si (％): 0.10 ~ 0.40
Mn (％): 0.60 ~ 0.90
P (％) ≤: 0.025
S (％) ≤: 0.020
TECHNICAL SPECIFICATION: DGA - AIR 9160/C - 1973
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS
MATERIAL CATEGORY: Low alloy structural steel
MELTING PROCESS - Consumable electrode remelted steel
H S CODE For Customs - 7228 4000 / 7228 5000 / 7228 6000
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.30 ~ 0.37
Si (％): 0.10 ~ 0.40
Mn (％): 0.60 ~ 0.90
P (％) ≤: 0.025
S (％) ≤: 0.020
Cr (%): 0.80 ~ 1.10
Mo (%): -
Ni (%): 1.20 ~ 1.60
MECHANICAL PROPERTIES UNDER ROOM TEMPERATURE
Tensile strength,σb/≥ MPa: 880 ~ 1080
Yield strength, σ0.2/≥ MPa: 740
Elongation, δ ≥(％): 14.0
Reduction of area, ф ≥ (％): -
Impact, AK (J/cm2): -
Annealed hardness | HB: 260 ~ 325
MECHANICAL PROPERTIES UNDER ROOM TEMPERATURE
Tensile strength,σb/≥ MPa: 880 ~ 1080
Yield strength, σ0.2/≥ MPa: 740
Elongation, δ ≥(％): 14.0
Reduction of area, ф ≥ (％): -
Impact, AK (J/cm2): -
Annealed hardness | HB: 260 ~ 325
Quenching, 850,+/-10 Deg. tempering 575, +/-5 Deg
AVAILABLE FORMS AND SHAPES
Round bar (Diameter): 5.5 mm to 500mm
Square bar / Flat bar: 3mm to 500mm
Steel plate: T3 ~ 200mm X W10 ~ 1500mm X Length
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
AVAILABLE FORMS AND SHAPES
Round bar (Diameter): 5.5 mm to 500mm
Square bar / Flat bar: 3mm to 500mm
Steel plate: T3 ~ 200mm X W10 ~ 1500mm X Length
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com.
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com.
Previous page：20XH2M
Last page：AIR9160C 35NCD16
Total list
Monthly rank
- 3438NCD4
- 3424CrMo5
- 3119CrNi5
- 2938B3
- 28ASTM A739 type B11
- 2826NiCrMoV11-5
- 2742Cr4Mo2
- 24S135
- 24EN 38
- 22EN20B