AIR9160C 35NCD16
2016-12-20 09:04:36 Origin： Remark：0 Click：
AIR 9160C 35NCD16 is a high carbon 4.0% Nickel - 2.0% Chromium High tensile steel, 35NCD16 Round bar, flat bar, and forgings Steelmaking, ESR melted.
TECHNICAL SPECIFICATION - AIR 9160C Grade 35NCD16
TECHNICAL SPECIFICATION: DGA - AIR 9160/C - 1973
FEATURE: 35NCD16 is a low alloy steel which combines high strength and hardenability with good dimensional stability, making it an excellent alloy for large section mechanical parts or tooling of complex shapes subject to high stressses.
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS
MATERIAL CATEGORY - low alloy structural steel
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (％): 0.30 ~ 0.40
Silicon, Si (％): 0.15 ~ 0.40
Manganese, Mn (％): 0.30 ~ 0.60
Phosphorus, P (％) ≤: 0.025
Sulfur, S (％) ≤: 0.020
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS
MATERIAL CATEGORY - low alloy structural steel
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (％): 0.30 ~ 0.40
Silicon, Si (％): 0.15 ~ 0.40
Manganese, Mn (％): 0.30 ~ 0.60
Phosphorus, P (％) ≤: 0.025
Sulfur, S (％) ≤: 0.020
Chromium, Cr (%): 1.60 ~ 2.00
Molybdenum, Mo (%): 0.25 ~ 0.60
Nickel, Ni (%): 3.50 ~ 4.20
MECHANICAL PROPERTIES UNDER ROOM TEMPERATURE
Tensile strength,σb/≥ MPa: 1230 ~ 1360
Yield strength, σ0.2/≥ MPa: 1030
Elongation, δ ≥(％): 10.0
Reduction of area, ф ≥ (％): 40.0
Impact, AK (J/cm2): -
Heat treated hardness | HB: 363 ~ 415
MECHANICAL PROPERTIES UNDER ROOM TEMPERATURE
Tensile strength,σb/≥ MPa: 1230 ~ 1360
Yield strength, σ0.2/≥ MPa: 1030
Elongation, δ ≥(％): 10.0
Reduction of area, ф ≥ (％): 40.0
Impact, AK (J/cm2): -
Heat treated hardness | HB: 363 ~ 415
Quenching, 875,+/-10 Deg X 3h, tempering 560, +/-5 Deg, air cooling
AVAILABLE FORMS / DIMENSIONS
Round bar (Diameter): 5.5 mm to 500mm
Square bar / Flat bar: 10mm to 500mm
Steel strip: T0.50 ~ 3mm X W10 ~ 1000mm X Coil
Forging piece: stepped shafts, other different shapes based on OEM.
AVAILABLE FORMS / DIMENSIONS
Round bar (Diameter): 5.5 mm to 500mm
Square bar / Flat bar: 10mm to 500mm
Steel strip: T0.50 ~ 3mm X W10 ~ 1000mm X Coil
Forging piece: stepped shafts, other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL (sales@ccsteels.com) our resident team of qualified production engineers.
If you meet further on any technical enquiry. pleased to EMAIL (sales@ccsteels.com) our resident team of qualified production engineers.
Previous page：AIR 9160C 36NC6
Last page：JIS G4309 SUS305
Total list
Monthly rank
- 3438NCD4
- 3424CrMo5
- 3119CrNi5
- 2938B3
- 28ASTM A739 type B11
- 2826NiCrMoV11-5
- 2742Cr4Mo2
- 24S135
- 24EN 38
- 22EN20B