SAE J1268 1045H
2017-02-16 10:27:41 Origin： Remark：0 Click：
Material technical specifications of ASTM standards H and RH type steels SAE J1268 Grade 1045H datasheet, SAE J1268 1045H Chemical compositions, mechanical property from Steelmaking, ESR melted, Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic test, Cold working or rough turned machining. Technical specification - SAE J1268 - 1995. We also possess the advanced precision machining equipments for catering for your different special requirements.
TECHNICAL SPECIFICATIONS - SAE J1268 Grade 1045H
MATERIAL TECHNICAL STANDARDS: SAE 1268 - 1995
MATERIAL TECHNICAL STANDARDS: SAE 1268 - 1995
MATERIAL TYPE: H and RH type steel for auto industry
Official Test Certificate Report: issued by TUV - SGS - BV
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.42 ~ 0.51
Si (％): 0.15 ~ 0.35
Mn (％): 0.50 ~ 1.00
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.42 ~ 0.51
Si (％): 0.15 ~ 0.35
Mn (％): 0.50 ~ 1.00
P (％)≤: 0.030
S (％)≤: 0.050
S (％)≤: 0.050
PRODUCT DESCRIPTION
The alloy is usually produced by LF /EAF /IFF /VD followed by electroslag refining (ESR) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / Wire rod (Diameter): 0.50mm to 800mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T6 - 200mm X W1000- 2500mm X L1000-12000mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
The alloy is usually produced by LF /EAF /IFF /VD followed by electroslag refining (ESR) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / Wire rod (Diameter): 0.50mm to 800mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T6 - 200mm X W1000- 2500mm X L1000-12000mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineer.
- Email: lh.steel@hotmail.com
Previous page：SAE J1268 1038H
Last page：ASTM 1522H
Total list
Monthly rank
- 3438NCD4
- 3424CrMo5
- 3119CrNi5
- 2938B3
- 28ASTM A739 type B11
- 2826NiCrMoV11-5
- 2742Cr4Mo2
- 24S135
- 24EN 38
- 22EN20B