60C2BA
2017-03-02 12:10:32 Origin： Remark：0 Click：
Specifications 60C2BA datasheet, 60C2BA Chemical, 60C2BA Properties from Steel making, ESR melted, Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3. Cold working, Peeled or rough turned machining. Material technical specification TOCT 14959 - 1979.
TECHNICAL SPECIFICATION - TOCT 14959 Grade 60C2BA
TECHNICAL SPECIFICATION - TOCT 14959 - 1979
OFFICIAL TEST CERTIFICATE - issued by TUV - SGS - BV
MATERIAL CATEGORY - Spring steel
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.61 ~ 0.69
Si (％): 1.50 ~ 2.00
Mn (％): 0.70 ~ 1.00
P (％) ≤: 0.025
S (％) ≤: 0.025
Cr (％): ≤ 0.30
Ni (％): ≤ 0.25
Cu (％): -
W (%): 0.80 ~ 1.20
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Annealed hardness | HBW: 321 max.
Heat treatment: Quenching 850 Deg. oil cooling
Tempering 420 Deg.
Tensile strength,σb/≥ MPa: 1862
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Annealed hardness | HBW: 321 max.
Heat treatment: Quenching 850 Deg. oil cooling
Tempering 420 Deg.
Tensile strength,σb/≥ MPa: 1862
Yield strength, σ0.2/≥ MPa: 1666
Elongation, δ ≥(％): 5.0
Reduction of area, ф ≥ (％): 20.0
MANUFACTURING TECHNIQUE
General spring steels are produced in electric furnace, open hearth furnace, oxygen converter,and high quality spring steel of higher quality or special performance can be made in electro slag furnace or vacuum furnace.
PROCESSING PROPERTY
Spring Steel is commonly used in the condition of impact, vibration, or long-term stress. which makes the spring steel require higher tensile strength, limit of elasticity, fatigue strength. also requirement of definite hardenability, good surface quality, not easy decarburization.
PRODUCT FORMS AVAILABLE
Round bar (Diameter): 5.5mm to 450mm
Square bar / Flat bar: 3mm to 500mm
Heavy/middle plate via hot rolled: T60 - 440mm X W50 - 1000mm X L1000 - 12000mm
Sheet steel via cold rolled: T0.5 - 6mm X W100 - 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Reduction of area, ф ≥ (％): 20.0
MANUFACTURING TECHNIQUE
General spring steels are produced in electric furnace, open hearth furnace, oxygen converter,and high quality spring steel of higher quality or special performance can be made in electro slag furnace or vacuum furnace.
PROCESSING PROPERTY
Spring Steel is commonly used in the condition of impact, vibration, or long-term stress. which makes the spring steel require higher tensile strength, limit of elasticity, fatigue strength. also requirement of definite hardenability, good surface quality, not easy decarburization.
PRODUCT FORMS AVAILABLE
Round bar (Diameter): 5.5mm to 450mm
Square bar / Flat bar: 3mm to 500mm
Heavy/middle plate via hot rolled: T60 - 440mm X W50 - 1000mm X L1000 - 12000mm
Sheet steel via cold rolled: T0.5 - 6mm X W100 - 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers. Email: sales@ccsteels.com.
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers. Email: sales@ccsteels.com.
Hot search：60C2BA
Total list
Monthly rank
- 3438NCD4
- 3424CrMo5
- 3119CrNi5
- 2938B3
- 28ASTM A739 type B11
- 2826NiCrMoV11-5
- 2742Cr4Mo2
- 24S135
- 24EN 38
- 22EN20B