1.4901 / X10CrWMoVNb9-2
2017-04-10 15:36:16 Origin： Remark：0 Click：
Material standard specifications of EN 10216-2 2002 Seamless steel tubes for pressure purposes- techincal delivery conditions 1.4901 data sheet, 1.4901 Chemical compositions, 1.4901 Mechanical properties from Steel making, ESR melted, Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3. Cold working, Peeled or rough turned machining.
TECHNICAL SPECIFICATION - EN X10CrWMoVNb9-2 & 1.4901
TECHNICAL SPECIFICATION: EN 10216-2 2002
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
MATERIAL CATEGORY: alloy structural steel
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.07 ~ 0.13
Si (％): ≤ 0.50
Mn (％): 0.30 ~ 0.60
P (％) ≤: 0.020
S (％) ≤: 0.010
Cr (%): 8.50 ~ 9.50
Mo (%): 0.30 ~ 0.60
Ni (%): ≤ 0.40
Nb (%): 0.04 ~ 0.09
Ni (%): ≤ 0.40
Nb (%): 0.04 ~ 0.09
V (%): 0.15 ~ 0.25
N (%): 0.030 ~ 0.070
B (%): 0.001 ~ 0.006
B (%): 0.001 ~ 0.006
W (%): 1.50 ~ 2.00
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Annealed hardness | HBS: -
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Annealed hardness | HBS: -
Heat treatment: Austenitizing 1040 ~ 1090D, air cooled
Tempering 730 ~ 780D, air cooled
Tensile strength,σb/≥ MPa: 620 ~ 850
Tensile strength,σb/≥ MPa: 620 ~ 850
Yield strength, σ0.2/≥ MPa: 440
Elongation, δ ≥(％): 19
Impact, ≥J /Akv: -
MANUFACTURING TECHNIQUE
The alloy is usually produced by IFF, LF, EAF + VD + LF followed by electroslag refining (ESR) if necessary for special purpose.
MANUFACTURING TECHNIQUE
The alloy is usually produced by IFF, LF, EAF + VD + LF followed by electroslag refining (ESR) if necessary for special purpose.
PRODUCT FORMS AVAILABLE
Round bar (Diameter): 5.50mm to 800mm
Square bar / Flat bar: 3mm to 500mm
Sheet steel via cold rolled: T 0.5 ~ 3.0mm X W200- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T 0.3 ~ 3mm X W5 - 200mm X L (or in coil form)
Round bar (Diameter): 5.50mm to 800mm
Square bar / Flat bar: 3mm to 500mm
Sheet steel via cold rolled: T 0.5 ~ 3.0mm X W200- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T 0.3 ~ 3mm X W5 - 200mm X L (or in coil form)
ADVANTAGED STOCKS FOR INTERNATIONAL MARKETS
Die/mold steel
German series: 1.2083, 1.4021, 1.4028, 1.2344, 1.2343, 1.2379, 1.2312, 1.2738, 1.2360, 1.2581、
1.2316, 1.2085, 1.2510, 1.2367, 17CrNiMo6, 34CrNi3Mo, 36CrNiMo8, 718, 718V, WB36 and so on.
American series: 420, 410, H13, H13ESR, D2, P20+Ni, P20+S, O1, O2, H10, H11, 4145H, 4340, P91, P92 and so on.
Japan-Korea series: SUS420J2, SKD11, SKD61, SKD6, DC53, SKS3, SKS31, SKT4, NAK80, HMD, KP4, KP4M
American series: 420, 410, H13, H13ESR, D2, P20+Ni, P20+S, O1, O2, H10, H11, 4145H, 4340, P91, P92 and so on.
Japan-Korea series: SUS420J2, SKD11, SKD61, SKD6, DC53, SKS3, SKS31, SKT4, NAK80, HMD, KP4, KP4M
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our team of qualified production engineers. - Email: lh.steel@hotmail.com
Hot search：1.4901/X10CrWMoVNb9-2
Previous page：X10CrWMoVNb9-2
Last page：S41427
Total list
Monthly rank
- 3438NCD4
- 3424CrMo5
- 3119CrNi5
- 2938B3
- 28ASTM A739 type B11
- 2826NiCrMoV11-5
- 2742Cr4Mo2
- 24S135
- 24EN 38
- 22EN20B