7CrMoVTiB10-10
2017-04-12 12:51:50 Origin: Remark:0 Click:
Material Specifications of EN 10216-2 of Grade 7CrMoVTiB10-10 Round bar, Flat bar 1.7378 Plate, ESR melted, Heat treatment, Rough turned machining.
TECHNICAL SPECIFICATION - EN 7CrMoVTiB10-10 & 1.7378
TECHNICAL SPECIFICATION: EN 10216-2 2002
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
MATERIAL CATEGORY: alloy structural steel
CHEMICAL COMPOSITION (mass weight -- %)
Carbon, C (%): 0.05 ~ 0.10
Silicon, Si (%): 0.15 ~ 0.45
Manganese, Mn (%): 0.30 ~ 0.70
Phosphorus, P (%) ≤: 0.020
Sulfur, S (%) ≤: 0.010
Chromium, Cr (%): 2.20 ~ 2.60
Molybdenum, Mo (%): 0.90 ~ 1.10
Nickel, Ni (%): -
Niobium, Nb (%): -
Nickel, Ni (%): -
Niobium, Nb (%): -
Vanadium, V (%): 0.20 ~ 0.30
Nitrogen, N (%): ≤ 0.02
Boron, B (%): 0.0015 ~ 0.0070
Boron, B (%): 0.0015 ~ 0.0070
Titanium, Ti (%): 0.05 ~ 0.10
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Annealed hardness | HBS: -
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Annealed hardness | HBS: -
Heat treatment: Austenitizing 980 ~ 1020D, air cooled
Tempering 730 ~ 770D, air cooled
Tensile strength,σb/≥ MPa: 565 ~ 840
Tensile strength,σb/≥ MPa: 565 ~ 840
Yield strength, σ0.2/≥ MPa: 430
Elongation, δ ≥(%): 15.0
Impact, ≥J /Akv: -
MANUFACTURING TECHNIQUE
The alloy is usually produced by IFF, LF, EAF + VD + LF followed by electroslag refining (ESR) if necessary for special purpose.
MANUFACTURING TECHNIQUE
The alloy is usually produced by IFF, LF, EAF + VD + LF followed by electroslag refining (ESR) if necessary for special purpose.
PRODUCT FORMS AVAILABLE
Round bar & Disc (diameter): 5.50mm to 800mm
Square bar / Flat bar: 10mm to 500mm
Sheet steel via cold rolled: T0.5 - 3.0mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Round bar & Disc (diameter): 5.50mm to 800mm
Square bar / Flat bar: 10mm to 500mm
Sheet steel via cold rolled: T0.5 - 3.0mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our team of qualified production engineers. E-mail: sales@ccsteels.com.
If you meet further on any technical enquiry, pleased to EMAIL our team of qualified production engineers. E-mail: sales@ccsteels.com.
Hot search:7CrMoVTiB10-10
Previous page:1.8201 / 7CrWVMoNb9-6
Last page:AMS 6274K
Total list
Monthly rank
- 3438NCD4
- 3424CrMo5
- 3119CrNi5
- 2938B3
- 28ASTM A739 type B11
- 2826NiCrMoV11-5
- 2742Cr4Mo2
- 24S135
- 24EN 38
- 22EN20B