AMS 6275E
2017-04-13 14:41:15 Origin： Remark：0 Click：
Technical specifications of Aerospace material specification AMS 6275E datasheet,6275E Chemical compositions, AMS 6275E mechanical property from Steelmaking, ESR melted, Blooming, 6275E Hot forging, Hot rolling, 6275E Heat treatment, Straightening, 100% Ultrasonic test, Cold working or rough turned machining. All of these materials conform to Military standard, nuclear power. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
TECHNICAL SPECIFICATIONS - AMS 6275E & UNS G94171
MATERIAL FORM: round bar, tube, forge piece
MATERIAL TYPE: Aerospace Material Specification - Structural steel
Official Test Certificate Report: issued by TUV - SGS - BV
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.15 ~ 0.20
Cr (％): 0.40
Ni (％): 0.45
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.15 ~ 0.20
Cr (％): 0.40
Ni (％): 0.45
Mo (％): 0.12
Others (％): B 0.002
Others (％): B 0.002
PRODUCT DESCRIPTION
The alloy is usually produced by VM /CVM followed by electroslag refining (ESR), Vacuum Arc Melting (VAR) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / Wire rod (Diameter) 0.10mm to 300mm
Square bar / Flat bar: 3mm to 400mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T6 - 200mm X W1000- 2500mm X L1000-12000mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
The alloy is usually produced by VM /CVM followed by electroslag refining (ESR), Vacuum Arc Melting (VAR) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / Wire rod (Diameter) 0.10mm to 300mm
Square bar / Flat bar: 3mm to 400mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T6 - 200mm X W1000- 2500mm X L1000-12000mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineer.
- Email: lh.steel@hotmail.com
Previous page：1.7378
Last page：B166 Gr.N06025
Total list
Monthly rank
- 3438NCD4
- 3424CrMo5
- 3119CrNi5
- 2938B3
- 28ASTM A739 type B11
- 2826NiCrMoV11-5
- 2742Cr4Mo2
- 24S135
- 24EN 38
- 22EN20B