36CrNiMo4
2017-06-02 13:41:31 Origin: Remark:0 Click:
Round bars 36CrNiMo4 Ex-stock, Plate 36CrNiMo4 wire rod, Shaft 36CrNiMo4 propert steelmaking, ESR melted, Blooming, Hot forging, Hot rolling, Heat treatment
TECHNICAL DATA SHEET - Grade ISO 36CrNiMo4
TECHNICAL SPECIFICATION: ISO 683/18-1996
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
MATERIAL CATEGORY: Alloy hardened structural steel
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (%): 0.32 ~ 0.40
Silicon, Si (%): 0.10 ~ 0.40
Manganese, Mn (%): 0.50 ~ 0.80
Phosphorus, P (%) ≤: 0.035
Sulfur, S (%) ≤: 0.035
Chromium, Cr (%): 0.90 ~ 1.20
Molybdenum, Mo (%): 0.15 ~ 0.30
Nickel, Ni (%): 0.90 ~ 1.20
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Size: 16mm Max.
Size: 16mm Max.
Annealed hardness | HBS: 248 max.
Tensile strength,σb/≥ MPa: 1100 ~ 1300
Tensile strength,σb/≥ MPa: 1100 ~ 1300
Yield strength, σ0.2/≥ MPa: 900
Elongation, δ ≥(%): 10
Impact, ≥J /Akv: 35
MANUFACTURING TECHNIQUE
The alloy is usually produced by IFF, LF, EAF + VD + LF followed by electroslag refining (ESR) if necessary for special purpose.Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different level according to the buyers' requirements.
MANUFACTURING TECHNIQUE
The alloy is usually produced by IFF, LF, EAF + VD + LF followed by electroslag refining (ESR) if necessary for special purpose.Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different level according to the buyers' requirements.
Bars are usually supplied brightly in the annealed condition.
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
PRODUCT FORMS AVAILABLE
Round bar & Disc (diameter): 5.5mm to 850mm
Square bar / Flat bar: 10mm to 610mm
Sheet steel via cold rolled: T0.5 - 3.0mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Round bar & Disc (diameter): 5.5mm to 850mm
Square bar / Flat bar: 10mm to 610mm
Sheet steel via cold rolled: T0.5 - 3.0mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our team of qualified production engineers. E-mail: sales@ccsteels.com.
If you meet further on any technical enquiry, pleased to EMAIL our team of qualified production engineers. E-mail: sales@ccsteels.com.
Hot search:36CrNiMo4
Previous page:BS 87B / EN41B / EN41
Last page:AMS 6330D
Total list
Monthly rank
- 3438NCD4
- 3424CrMo5
- 3119CrNi5
- 2938B3
- 28ASTM A739 type B11
- 2826NiCrMoV11-5
- 2742Cr4Mo2
- 24S135
- 24EN 38
- 22EN20B