AMS 6417C / K44220
2017-07-31 10:29:31 Origin： Remark：0 Click：
Aerospace Specification AMS 6417C Datasheet Chemical compositions, K44220 Bar properties from Steelmaking, ESR melted, Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic test, Cold working or rough turned machining. All of these materials conform to Military standard, nuclear power. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
TECHNICAL SPECIFICATIONS - AMS 6417C & K44220
MATERIAL FORM: Bar, Forge piece, Tube
MATERIAL TYPE: Aerospace Material Specification - Structural steel
Official Test Certificate Report: issued by TUV - SGS - BV
CHEMICAL COMPOSITION (Mass weight - %)
C (％): 0.38 ~ 0.43
CHEMICAL COMPOSITION (Mass weight - %)
C (％): 0.38 ~ 0.43
Si: (%): 1.50 ~ 1.80
Mn (%): 0.70 ~ 1.00
Cr (％): 0.65 ~ 1.00
Ni (％): 1.65 ~ 2.00
Cr (％): 0.65 ~ 1.00
Ni (％): 1.65 ~ 2.00
Mo (％): 0.30 ~ 0.50
V (%): 0.05 ~ 0.15
TYPICAL MECHANICAL PROPERTY
Tensile strength σb≥/MPa: 745
Yield strength σs≥/MPa: 470
Elongation δ5≥(%): 22.0
Yield strength σs≥/MPa: 470
Elongation δ5≥(%): 22.0
AKV≥/J: -
Annealed hardness HB: 217
Annealed hardness HB: 217
PRODUCT DESCRIPTION
The alloy is usually produced by VM / CVM followed by electroslag refining (ESR), Vacuum Arc Melting (VAR) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / Wire rod (Diameter) 5.5 to 300mm
Square bar / Flat bar: 3 to 400mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T6 - 200 X W200 - 1000 X L1000 - 2000mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
The alloy is usually produced by VM / CVM followed by electroslag refining (ESR), Vacuum Arc Melting (VAR) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / Wire rod (Diameter) 5.5 to 300mm
Square bar / Flat bar: 3 to 400mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T6 - 200 X W200 - 1000 X L1000 - 2000mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
MAIN STEEL GRADE FOR EXPORT
ASTM A565 Grade 616/422/S42200, Grade 615/S41800, XM-32/S64152, PH13-8/XM-13/s13800
17-4PH/630/1.4542, 631, 851, 961, WB36, D6-AC, D6A. A-286/660
1.4980, 1.4922, 1.4923, 1.4935, 1.4938, 1.4913, 1.4122
Forms: Bars, Forge piece, Ring, Strip
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineer. E-mail: sales@ccsteels.com.
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineer. E-mail: sales@ccsteels.com.
Previous page：DTD 5012
Last page：Corrosist IL
Total list
Monthly rank
- 3438NCD4
- 3424CrMo5
- 3119CrNi5
- 2938B3
- 28ASTM A739 type B11
- 2826NiCrMoV11-5
- 2742Cr4Mo2
- 24S135
- 24EN 38
- 22EN20B