135 Mod
2017-09-27 08:48:39 Origin： Remark：0 Click：
Description 135 Mod Flat bars, Plate 135 Mod On stock, Inventory 135 Mod Forgigns property from Steelmaking,ESR melted, Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic test, Cold working or rough turned machining. All of these materials conform to Military standard, nuclear power. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
TECHNICAL SPECIFICATIONS - Grade AISI 135 Mod
MATERIAL FORM: Bar, forge piece, plate
TECHNIQUE AND QUALITY: Nitriding, QT
MATERIAL TYPE: Aerospace Material Specification - Structural steel
Official Test Certificate Report: issued by TUV - SGS - BV
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.38 ~ 0.43
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.38 ~ 0.43
Si: (%): 0.10 ~ 0.40
Mn (%): 0.60 ~ 0.80
Cr (％): 1.50 ~ 1.70
Ni (％): -
Cr (％): 1.50 ~ 1.70
Ni (％): -
Mo (％): 0.30 ~ 0.45
Al (%): 0.90 ~ 1.20
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Tensile strength σb≥/MPa: 760
Yield strength σs≥/MPa: 580
Elongation δ5≥(%): 15.0
Yield strength σs≥/MPa: 580
Elongation δ5≥(%): 15.0
Impact, AKV≥/J: -
QT condition - Hardness HB: 369 ~ 321
QT condition - Hardness HB: 369 ~ 321
PRODUCT DESCRIPTION
The alloy is usually produced by VM /CVM followed by electroslag refining (ESR), Vacuum Arc Melting (VAR) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / Wire rod (Diameter) 5.5mm to 300mm
Square bar / Flat bar: 3mm to 400mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T6 - 200mm X W10 - 1000mm X L1000-12000mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
The alloy is usually produced by VM /CVM followed by electroslag refining (ESR), Vacuum Arc Melting (VAR) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / Wire rod (Diameter) 5.5mm to 300mm
Square bar / Flat bar: 3mm to 400mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T6 - 200mm X W10 - 1000mm X L1000-12000mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineer. - Email: sales@ccsteels.com.
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineer. - Email: sales@ccsteels.com.
Previous page：AMS 6471
Last page：Duratherm 2602
Total list
Monthly rank
- 3438NCD4
- 3424CrMo5
- 3119CrNi5
- 2938B3
- 28ASTM A739 type B11
- 2826NiCrMoV11-5
- 2742Cr4Mo2
- 24S135
- 24EN 38
- 22EN20B