AMS 6475 / K52355
2017-10-14 10:08:52 Origin： Remark：0 Click：
Description AMS 6475 Wire rod, Inventory AMS 6475 Flat bars, Forgings K52355 Plate properties from Steelmaking, ESR melted, Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic test, Cold working or rough turned machining.
TECHNICAL SPECIFICATIONS - AMS 6475 & UNS K52355
MATERIAL FORM: Bar, forge piece, tube
TECHNIQUE AND QUALITY: Nitriding series
MATERIAL TYPE: Aerospace Material Specification - Structural steel
MELTING PROCESS - VIM + VAR / ESR Consumable electrode remelted
H S CODE For Customs - 7228 4000 / 7228 5000 / 7228 6000
H S CODE For Customs - 7228 4000 / 7228 5000 / 7228 6000
Official Test Certificate Report: issued by TUV - SGS - BV
CHEMICAL COMPOSITION (mass weight %)
C (％): 0.21 ~ 0.26
CHEMICAL COMPOSITION (mass weight %)
C (％): 0.21 ~ 0.26
Si: (%): 0.10 ~ 0.40
Mn (%): 0.60 ~ 0.80
Cr (％): 1.00 ~ 1.20
Ni (％): 3.25 ~ 3.75
Cr (％): 1.00 ~ 1.20
Ni (％): 3.25 ~ 3.75
Mo (％): 0.10 ~ 0.45
Al (%): 1.10 ~ 1.45
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Tensile strength σb≥/MPa: 935
Yield strength σs≥/MPa: 800
Elongation δ5≥(%): 13.0
Yield strength σs≥/MPa: 800
Elongation δ5≥(%): 13.0
Impact, AKV≥/J: -
Hardness HB: -
Hardness HB: -
PRODUCT DESCRIPTION
The alloy is usually produced by VM /CVM followed by electroslag refining (ESR), Vacuum Arc Melting (VAR) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / Wire rod (Diameter): 5.5mm to 550mm
Square bar / Flat bar: 3mm to 400mm
Length: fixed length, random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T6 - 200mm X W10 - 1500mm X L1000-12000mm
Forging piece: stepped shafts, and other different shapes based on OEM.
The alloy is usually produced by VM /CVM followed by electroslag refining (ESR), Vacuum Arc Melting (VAR) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / Wire rod (Diameter): 5.5mm to 550mm
Square bar / Flat bar: 3mm to 400mm
Length: fixed length, random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T6 - 200mm X W10 - 1500mm X L1000-12000mm
Forging piece: stepped shafts, and other different shapes based on OEM.
AVAILABLE ITEMS
ASTM A565 Grade 616/422/S42200, Grade 615/S41800, XM-32/S64152, PH13-8/XM-13/s13800
17-4PH/630/1.4542, 631, 851, 961, WB36, D6-AC, D6A. A-286/660
1.4980, 1.4922, 1.4923, 1.4935, 1.4938, 1.4913, 1.4122
Forms: Bars, Forge piece, Ring, Strip
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com.
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com.
Previous page：Z6CN18-09
Last page：Z6CN19-09Az
Total list
Monthly rank
- 3438NCD4
- 3424CrMo5
- 3119CrNi5
- 2938B3
- 28ASTM A739 type B11
- 2826NiCrMoV11-5
- 2742Cr4Mo2
- 24S135
- 24EN 38
- 22EN20B