AMS 6485
2017-10-18 11:20:52 Origin： Remark：0 Click：
Description AMS 6485 Wire rod, Ex-stock AMS 6485 Flat bars, Inventory AMS 6485 Shaft Property from Steelmaking, ESR melted, Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Nondestructive ultrasonic test, Cold work or rough turned machining. All of these materials conform to Military standard, nuclear power. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
TECHNICAL SPECIFICATIONS - Grade AMS 6485 & UNS T20811
MATERIAL FORM: Bar, palte, forge piece
TECHNIQUE AND QUALITY: CVM
MATERIAL TYPE: Aerospace Material specification - Structural steel
Official Test Certificate Report: issued by TUV - SGS - BV
CHEMICAL COMPOSITION (Mass weight - %)
C (％): 0.38 ~ 0.43
CHEMICAL COMPOSITION (Mass weight - %)
C (％): 0.38 ~ 0.43
Si: (%): 0.10 ~ 0.40
Mn (%): 0.60 ~ 0.80
Cr (％): 4.75 ~ 5.50
Ni (％): -
Cr (％): 4.75 ~ 5.50
Ni (％): -
Mo (％): 1.25 ~ 1.75
V (%): 0.35 ~ 0.70
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Tensile strength σb≥/MPa: 1435
Yield strength σs≥/MPa: -
Yield strength σs≥/MPa: -
Elongation δ5≥(%): 7.0
Impact, AKV≥/J: -
Hardness HB: 230 max (annealed condition)
Hardness HB: 230 max (annealed condition)
PRODUCT DESCRIPTION
The alloy is usually produced by VM /CVM followed by electroslag refining (ESR), Vacuum Arc Melting (VAR) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / Wire rod (Diameter): 3.0mm to 450mm
Square bar / Flat bar: 3mm to 400mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T6 - 200mm X W10 - 1500mm X L1000-12000mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
The alloy is usually produced by VM /CVM followed by electroslag refining (ESR), Vacuum Arc Melting (VAR) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / Wire rod (Diameter): 3.0mm to 450mm
Square bar / Flat bar: 3mm to 400mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T6 - 200mm X W10 - 1500mm X L1000-12000mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com.
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com.
Previous page：Z6CND18-12-03
Last page：Z6CNDNb17-12
Total list
Monthly rank
- 3438NCD4
- 3424CrMo5
- 3119CrNi5
- 2938B3
- 28ASTM A739 type B11
- 2826NiCrMoV11-5
- 2742Cr4Mo2
- 24S135
- 24EN 38
- 22EN20B