AMS 6488
2017-10-23 11:00:17 Origin： Remark：0 Click：
Description AMS 6488 Flat bar, Plate AMS 6488 Stock available, Shaft AMS 6488 Forging Property from ESR melted, Blooming, Hot forging, Heat treatment
TECHNICAL DATA SHEET - AMS 6488D & H11
MATERIAL FORM: Bar, plate, forgings, shaft
TECHNIQUE AND QUALITY: Superior
MATERIAL TYPE: Aerospace Material Specification - Structural steel
Official Test Certificate Report: issued by TUV - SGS - BV
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (％): 0.38 ~ 0.43
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (％): 0.38 ~ 0.43
Silicon, Si: (%): 0.10 ~ 0.40
Manganese, Mn (%): 0.60 ~ 0.80
Chromium, Cr (％): 4.75 ~ 5.50
NIckel, Ni (％): -
Chromium, Cr (％): 4.75 ~ 5.50
NIckel, Ni (％): -
Molybdenum, Mo (％): 1.25 ~ 1.75
Vanadium, V (%): 0.35 ~ 0.70
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Tensile strength, Rm ≥ MPa: 1435
Yield strength, Rp0.2 ≥ MPa: -
Yield strength, Rp0.2 ≥ MPa: -
Elongation, A5 ≥ (%): 7.0
Impact, AKV≥/J: -
Hardness HB: 230 max (annealed condition)
Hardness HB: 230 max (annealed condition)
PRODUCT DESCRIPTION
The alloy is usually produced by VM / CVM followed by electroslag refining (ESR), Vacuum Arc Melting (VAR) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / rod / disc (diameter): 5.50mm to 850mm
Square bar / flat bar: 10mm to 400mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T10 - 400mm X W20 - 1200mm X Lmm
Forging piece: stepped shafts, other different shapes based on OEM.
The alloy is usually produced by VM / CVM followed by electroslag refining (ESR), Vacuum Arc Melting (VAR) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / rod / disc (diameter): 5.50mm to 850mm
Square bar / flat bar: 10mm to 400mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T10 - 400mm X W20 - 1200mm X Lmm
Forging piece: stepped shafts, other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com.
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com.
Previous page：T13148
Last page：Refractaloy 26 / R-26
Total list
Monthly rank
- 3438NCD4
- 3424CrMo5
- 3119CrNi5
- 2938B3
- 28ASTM A739 type B11
- 2826NiCrMoV11-5
- 2742Cr4Mo2
- 24S135
- 24EN 38
- 22EN20B