BS 762-690
2018-10-15 19:25:02 Origin： Remark：0 Click：
Description BS 762-690 sheet, Flat bars BS 762-690 Inventory, Shaft BS 762-690 Properties from Steelmaking, ESR melted, Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic test & Magnetic powder inspection, Cold working, Peeled or rough turned machining. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
TECHNICAL DATA SHEET - Grade BS 762-690
MATERIAL CATEGORY: alloy steel bars, forge pieces for pressure vessel
MATERIAL SPECIFICATIONS: BS 1503 1989
MATERIAL SPECIFICATIONS: BS 1503 1989
MELTING PROCESS - Consumable electrode remelted steel
H S CODE For Customs - 7228 4000 / 7228 5000 / 7228 6000
OFFICIAL TEST REPORT - issued by TUV - SGS - BV
CHEMICAL COMPOSITIONS (Mass weight - %)
C (％): 0.17 ~ 0.23
Si (%): 0.15 ~ 0.40
Mn (％): 0.30 ~ 1.00
P (％)≤: 0.030
S (％)≤: 0.025
Cr (%): 11.0 ~ 12.5
Ni (%): 0.30 ~ 0.80
Mo (%): 0.70 ~ 1.20
Cu (%): ≤ 0.30
Al (%): ≤ 0.020
TYPICAL MECHANICAL PROPERTIES
Tensile strength,σb/≥ MPa: 740 ~ 880
Yield strength, σ0.2/≥ MPa: 540
Elongation, δ ≥(％): 14.0
Reduction of area, (%): -
Annealed hardness, HB ≤: 305
MELTING PROCESS
This alloy is generally air melted of Non-VIM + ESR, Electric Arc Furnace (EAF), EAF+LF+VD, or + Electroslag remelting (ESR).
For a purpose of superior quality, it should be smelt via technology of VIM + Vacuum refining or by agreement.
For a purpose of superior quality, it should be smelt via technology of VIM + Vacuum refining or by agreement.
AVAILABLE FORMS & DIMENSIONS
Round bar (Diameter): 5.50mm to 450mm
Square bar / Flat bar: THK1.0 to 200mm X Width 3 ~ 450mm
Length: Fixed length or random length or based on the customer's special requirement.
Other different shapes based on OEM.
Other sizes can be supplied to meet specific requirements.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@ccsteels.com.
MATERIAL CATEGORY: alloy steel bars, forge pieces for pressure vessel
MATERIAL SPECIFICATIONS: BS 1503 1989
MATERIAL SPECIFICATIONS: BS 1503 1989
MELTING PROCESS - Consumable electrode remelted steel
H S CODE For Customs - 7228 4000 / 7228 5000 / 7228 6000
OFFICIAL TEST REPORT - issued by TUV - SGS - BV
CHEMICAL COMPOSITIONS (Mass weight - %)
C (％): 0.17 ~ 0.23
Si (%): 0.15 ~ 0.40
Mn (％): 0.30 ~ 1.00
P (％)≤: 0.030
S (％)≤: 0.025
Cr (%): 11.0 ~ 12.5
Ni (%): 0.30 ~ 0.80
Mo (%): 0.70 ~ 1.20
Cu (%): ≤ 0.30
Al (%): ≤ 0.020
TYPICAL MECHANICAL PROPERTIES
Tensile strength,σb/≥ MPa: 740 ~ 880
Yield strength, σ0.2/≥ MPa: 540
Elongation, δ ≥(％): 14.0
Reduction of area, (%): -
Annealed hardness, HB ≤: 305
MELTING PROCESS
This alloy is generally air melted of Non-VIM + ESR, Electric Arc Furnace (EAF), EAF+LF+VD, or + Electroslag remelting (ESR).
For a purpose of superior quality, it should be smelt via technology of VIM + Vacuum refining or by agreement.
For a purpose of superior quality, it should be smelt via technology of VIM + Vacuum refining or by agreement.
AVAILABLE FORMS & DIMENSIONS
Round bar (Diameter): 5.50mm to 450mm
Square bar / Flat bar: THK1.0 to 200mm X Width 3 ~ 450mm
Length: Fixed length or random length or based on the customer's special requirement.
Other different shapes based on OEM.
Other sizes can be supplied to meet specific requirements.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@ccsteels.com.
Previous page：BS 660-460
Last page：BS 629-470
Total list
Monthly rank
- 3438NCD4
- 3424CrMo5
- 3119CrNi5
- 2938B3
- 28ASTM A739 type B11
- 2826NiCrMoV11-5
- 2742Cr4Mo2
- 24S135
- 24EN 38
- 22EN20B