ASTM A336 Grade F5
2019-07-01 14:31:45 Origin： Remark：0 Click：
Specifications ASTM A336 Gr.F5 Round bar, F5 Plate, Sheet ASTM A336 Gr.F5 Steelmaking, ESR melted, Hot forging, Hot rolling, final heat treatment.
TECHNICAL DATA SHEET - ASTM A336 Grade F5
MATERIAL TECHNICAL STANDARDS: ASTM A336 - 2009
MATERIAL TYPE: 5.0Cr - 0.55Mo Alloy steel (Diameter 60 ~ 260mm on-hand stock)
MHEMICAL COMPOSITION (mass weight - %)
Carbon, C (％): ≤ 0.15
MHEMICAL COMPOSITION (mass weight - %)
Carbon, C (％): ≤ 0.15
Manganese, Mn (％): 0.30 ~ 0.60
Silicon, Si (％): ≤ 0.50
Silicon, Si (％): ≤ 0.50
Phosphorus, P (％)≤: 0.025
Sulfur, S (％)≤: 0.025
Chromium, Cr (%): 4.00 ~ 6.00
Molybdenum, Mo (%): 0.45 ~ 0.65
Sulfur, S (％)≤: 0.025
Chromium, Cr (%): 4.00 ~ 6.00
Molybdenum, Mo (%): 0.45 ~ 0.65
Nickel, Ni (%): ≤ 0.50
TYPICAL MECHANICAL PROPERTIES
Tensile strength, σb/≥ MPa: 415 ~ 585
Yield strength, σ0.2/MPa: 250
Elongation, δ ≥(％): 20.0
Reduction of area, ф ≥ (％): 40.0
Hardness via heat treatment /HBW: -
Reduction of area, ф ≥ (％): 40.0
Hardness via heat treatment /HBW: -
PRODUCT DESCRIPTION
The alloy is usually produced by BEF / EAF + VD + LF, followed by electroslag refining (ESR) if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / Disc (diameter): 5.5mm to 800mm
Square bar / flat bar: 10mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 - 450mm X W100 - 1200mm X L1000 - 12000mm
Forging piece: stepped shafts, other different shapes based on OEM.
The alloy is usually produced by BEF / EAF + VD + LF, followed by electroslag refining (ESR) if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / Disc (diameter): 5.5mm to 800mm
Square bar / flat bar: 10mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 - 450mm X W100 - 1200mm X L1000 - 12000mm
Forging piece: stepped shafts, other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineer. Email: sales@ccsteels.com.
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineer. Email: sales@ccsteels.com.
Previous page：ASTM A336 Gr. F12
Last page：Inconel 603XL
Total list
Monthly rank
- 3438NCD4
- 3424CrMo5
- 3119CrNi5
- 2938B3
- 28ASTM A739 type B11
- 2826NiCrMoV11-5
- 2742Cr4Mo2
- 24S135
- 24EN 38
- 22EN20B