ASTM A336 type F3VCb
2019-07-26 09:01:00 Origin： Remark：0 Click：
Standard specification for Alloy steel forgings for pressure and high-temperature parts ASTM A336 type F3VCb datasheet, ASTM A336 type F3VCb Chemical compositions, ASTM A336 type F3VCb Mechanical property from Steelmaking, ESR melted, Blooming,Hot forging/rolling, Heat treatment, Straightening, 100% Ultrasonic test, Cold working or rough turned machining. Technical specification - ASTM A336 - 2009.
MATERIAL TECHNICAL STANDARDS: ASTM A336 - 2009
MATERIAL TYPE: Alloy steel
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.10 ~ 0.15
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.10 ~ 0.15
Mn (％): 0.30 ~ 0.80
Si (％): ≤ 0.10
Si (％): ≤ 0.10
P (％)≤: 0.020
S (％)≤: 0.020
Cr (%): 2.70 ~ 3.30
Mo (%): 0.90 ~ 1.10
S (％)≤: 0.020
Cr (%): 2.70 ~ 3.30
Mo (%): 0.90 ~ 1.10
Ni (%): ≤ 0.25
V (%): 0.20 ~ 0.30
Nb (%): 0.015 ~ 0.070
Cu (%): ≤ 0.25
B (%): -
W (%): -
Al (%): -
Ti (%): ≤ 0.015
TYPICAL MECHANICAL PROPERTIES
Tensile strength, σb/≥ MPa: 585 ~ 780
Yield strength, σ0.2/MPa: 415
Elongation, δ ≥(％): 18.0
Reduction of area, ф ≥ (％): 45.0
Hardness via heat treatment /HBW: 235 MAX.
Reduction of area, ф ≥ (％): 45.0
Hardness via heat treatment /HBW: 235 MAX.
PRODUCT DESCRIPTION
The alloy is usually produced by BEF /EAF + VD followed by electroslag refining (ESR) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / Wire rod (Diameter): 0.50mm to 600mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T6 - 200mm X W1000- 2500mm X L1000-12000mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
The alloy is usually produced by BEF /EAF + VD followed by electroslag refining (ESR) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / Wire rod (Diameter): 0.50mm to 600mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T6 - 200mm X W1000- 2500mm X L1000-12000mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers.
Hot search：ASTM A336 type F3VCb
Previous page：1.4646
Last page：Inconel 610
Total list
Monthly rank
- 3438NCD4
- 3424CrMo5
- 3119CrNi5
- 2938B3
- 28ASTM A739 type B11
- 2826NiCrMoV11-5
- 2742Cr4Mo2
- 24S135
- 24EN 38
- 22EN20B