ASTM A336 type F22V
2024-10-14 13:34:00 Origin： Remark：0 Click：
Material Specifications ASTM A336 type F22V Plate, Round bar, Flat bar F22V ESR melted, Hot forging, Hot rolling, Heat treatment
MATERIAL TECHNICAL STANDARDS: ASTM A336 - 2009
Manganese, Mn (％): 0.30 ~ 0.80
Silicon, Si (％): ≤ 0.10
Silicon, Si (％): ≤ 0.10
Phosphorus, P (％) ≤: 0.015
Sulfur, S (％) ≤: 0.010
Chromium, Cr (%): 2.00 ~ 2.50
Molybdeunm, Mo (%): 0.90 ~ 1.10
Sulfur, S (％) ≤: 0.010
Chromium, Cr (%): 2.00 ~ 2.50
Molybdeunm, Mo (%): 0.90 ~ 1.10
Nickel, Ni (%): ≤ 0.25
Vanadium, V (%): 0.25 ~ 0.35
Niobium, Nb (%): ≤ 0.07
Copper, Cu (%): ≤ 0.20
Boron, B (%): ≤ 0.0020
Tungsten, W (%): -
Aluminum, Al (%): -
Titanium, Ti (%): ≤ 0.030
TYPICAL MECHANICAL PROPERTIES
Tensile strength, Rm ≥ MPa: 585 ~ 780
Yield strength, Rp0.2 / MPa: 415
Elongation, A5 ≥ (％): 18.0
Reduction of area, Z ≥ (％): 45.0
Hardness via heat treatment /HBW: 235 max.
Reduction of area, Z ≥ (％): 45.0
Hardness via heat treatment /HBW: 235 max.
PRODUCT DESCRIPTION
The alloy is usually produced by BEF /EAF + VD followed by electroslag refining (ESR) if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / Wire rod (Diameter): 0.50mm to 600mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T6 - 200mm X W1000- 2500mm X L1000-12000mm
Forging piece: stepped shafts, other different shapes based on OEM.
The alloy is usually produced by BEF /EAF + VD followed by electroslag refining (ESR) if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / Wire rod (Diameter): 0.50mm to 600mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T6 - 200mm X W1000- 2500mm X L1000-12000mm
Forging piece: stepped shafts, other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry. pleased to EMAIL (sales@ccsteels.com) our resident team of qualified production engineers.
If you meet further on any technical enquiry. pleased to EMAIL (sales@ccsteels.com) our resident team of qualified production engineers.
Hot search：ASTM A336 type F22V
Previous page：Inconel 610
Last page：ASTM A387 Grade 2
Total list
Monthly rank
- 3438NCD4
- 3424CrMo5
- 3119CrNi5
- 2938B3
- 28ASTM A739 type B11
- 2826NiCrMoV11-5
- 2742Cr4Mo2
- 24S135
- 24EN 38
- 22EN20B