ASTM A182 Grade F1
2019-09-10 09:11:28 Origin： Remark：0 Click：
Description F1 Specification, Round bar F1 Shaft, Inventory ASTM A182 Grade F1, ASTM A182 type F1 property from Steelmaking, ESR melted, Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic test, Cold working or rough turned machining. Technical specification - ASTM A182 - 2018.
TECHNICAL DATA SHEET - ASTM A182 Grade F1
MATERIAL TECHNICAL STANDARDS: ASTM A182 - 2018
Mn (％): 0.60 ~ 0.90
Si (％): 0.15 ~ 0.35
Si (％): 0.15 ~ 0.35
P (％)≤: 0.040
S (％)≤: 0.040
Cr (%): -
Mo (%): 0.44 ~ 0.65
S (％)≤: 0.040
Cr (%): -
Mo (%): 0.44 ~ 0.65
Ni (%): -
Nb (%): -
Ti (%): -
TYPICAL MECHANICAL PROPERTIES
Tensile strength, σb/≥ MPa: 485
Yield strength, σ0.2/MPa: 275
Elongation, δ ≥(％): 20.0
Reduction of area, ф ≥ (％): 30.0
Hardness via heat treatment /HBW: 143 ~ 192
Reduction of area, ф ≥ (％): 30.0
Hardness via heat treatment /HBW: 143 ~ 192
HEAT TREATMENT PRACTICE
Condition: annealed 900 Deg.
Cooling medium: furnace cool
PRODUCT DESCRIPTION
The alloy is usually produced by BEF / BEF + AOD / EAF, followed by electroslag refining (ESR or VAR ) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / Wire rod (Diameter): 0.50mm to 650mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T6 - 200mm X W10 - 1500mm X L1000-12000mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
The alloy is usually produced by BEF / BEF + AOD / EAF, followed by electroslag refining (ESR or VAR ) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / Wire rod (Diameter): 0.50mm to 650mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T6 - 200mm X W10 - 1500mm X L1000-12000mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical inquiry. pleased to EMAIL (sales@ccsteels.com) our resident team of qualified production engineers.
If you meet further on any technical inquiry. pleased to EMAIL (sales@ccsteels.com) our resident team of qualified production engineers.
Total list
Monthly rank
- 3438NCD4
- 3424CrMo5
- 3119CrNi5
- 2938B3
- 28ASTM A739 type B11
- 2826NiCrMoV11-5
- 2742Cr4Mo2
- 24S135
- 24EN 38
- 22EN20B